Return Bends Steel Butt-welding

731161 RETURN BEND STEEL BUTT-WELDING, SGP 180DEG LONG RADIUS 15A

IMPA:731161

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731162 RETURN BEND STEEL BUTT-WELDING, SGP 180DEG LONG RADIUS 20A

IMPA:731162

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731163 RETURN BEND STEEL BUTT-WELDING, SGP 180DEG LONG RADIUS 25A

IMPA:731163

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731164 RETURN BEND STEEL BUTT-WELDING, SGP 180DEG LONG RADIUS 32A

IMPA:731164

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731165 RETURN BEND STEEL BUTT-WELDING, SGP 180DEG LONG RADIUS 40A

IMPA:731165

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731166 RETURN BEND STEEL BUTT-WELDING, SGP 180DEG LONG RADIUS 50A

IMPA:731166

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731167 RETURN BEND STEEL BUTT-WELDING, SGP 180DEG LONG RADIUS 65A

IMPA:731167

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731168 RETURN BEND STEEL BUTT-WELDING, SGP 180DEG LONG RADIUS 80A

IMPA:731168

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731169 RETURN BEND STEEL BUTT-WELDING, SGP 180DEG LONG RADIUS 90A

IMPA:731169

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731170 RETURN BEND STEEL BUTT-WELDING, SGP 180DEG LONG RADIUS 100A

IMPA:731170

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731171 RETURN BEND STEEL BUTT-WELDING, SGP 180DEG LONG RADIUS 125A

IMPA:731171

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731172 RETURN BEND STEEL BUTT-WELDING, SGP 180DEG LONG RADIUS 150A

IMPA:731172

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731173 RETURN BEND STEEL BUTT-WELDING, SGP 180DEG LONG RADIUS 200A

IMPA:731173

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731174 RETURN BEND STEEL BUTT-WELDING, SGP 180DEG LONG RADIUS 250A

IMPA:731174

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731175 RETURN BEND STEEL BUTT-WELDING, SGP 180DEG LONG RADIUS 300A

IMPA:731175

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731181 RETURN BEND STEEL BUTT-WELDING, SGP 180DEG SHORT RADIUS 25A

IMPA:731181

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731182 RETURN BEND STEEL BUTT-WELDING, SGP 180DEG SHORT RADIUS 32A

IMPA:731182

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731183 RETURN BEND STEEL BUTT-WELDING, SGP 180DEG SHORT RADIUS 40A

IMPA:731183

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731184 RETURN BEND STEEL BUTT-WELDING, SGP 180DEG SHORT RADIUS 50A

IMPA:731184

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731185 RETURN BEND STEEL BUTT-WELDING, SGP 180DEG SHORT RADIUS 65A

IMPA:731185

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731186 RETURN BEND STEEL BUTT-WELDING, SGP 180DEG SHORT RADIUS 80A

IMPA:731186

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731187 RETURN BEND STEEL BUTT-WELDING, SGP 180DEG SHORT RADIUS 90A

IMPA:731187

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731188 RETURN BEND STEEL BUTT-WELDING, SGP 180DEG SHORT RADIUS 100A

IMPA:731188

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731189 RETURN BEND STEEL BUTT-WELDING, SGP 180DEG SHORT RADIUS 125A

IMPA:731189

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731190 RETURN BEND STEEL BUTT-WELDING, SGP 180DEG SHORT RADIUS 150A

IMPA:731190

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731191 RETURN BEND STEEL BUTT-WELDING, SGP 180DEG SHORT RADIUS 200A

IMPA:731191

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731192 RETURN BEND STEEL BUTT-WELDING, SGP 180DEG SHORT RADIUS 250A

IMPA:731192

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731193 RETURN BEND STEEL BUTT-WELDING, SGP 180DEG SHORT RADIUS 300A

IMPA:731193

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).