Elbows 90 deg. Short Radius Steel Butt-welding

731141 ELBOW STEEL BUTT-WELDING SGP, 90DEG SHORT RADIUS 25A

IMPA:731141

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731142 ELBOW STEEL BUTT-WELDING SGP, 90DEG SHORT RADIUS 32A

IMPA:731142

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731143 ELBOW STEEL BUTT-WELDING SGP, 90DEG SHORT RADIUS 40A

IMPA:731143

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731144 ELBOW STEEL BUTT-WELDING SGP, 90DEG SHORT RADIUS 50A

IMPA:731144

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731145 ELBOW STEEL BUTT-WELDING SGP, 90DEG SHORT RADIUS 65A

IMPA:731145

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731146 ELBOW STEEL BUTT-WELDING SGP, 90DEG SHORT RADIUS 80A

IMPA:731146

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731147 ELBOW STEEL BUTT-WELDING SGP, 90DEG SHORT RADIUS 90A

IMPA:731147

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731148 ELBOW STEEL BUTT-WELDING SGP, 90DEG SHORT RADIUS 100A

IMPA:731148

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731149 ELBOW STEEL BUTT-WELDING SGP, 90DEG SHORT RADIUS 125A

IMPA:731149

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731150 ELBOW STEEL BUTT-WELDING SGP, 90DEG SHORT RADIUS 150A

IMPA:731150

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731151 ELBOW STEEL BUTT-WELDING SGP, 90DEG SHORT RADIUS 200A

IMPA:731151

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731152 ELBOW STEEL BUTT-WELDING SGP, 90DEG SHORT RADIUS 250A

IMPA:731152

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731153 ELBOW STEEL BUTT-WELDING SGP, 90DEG SHORT RADIUS 300A

IMPA:731153

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).