Elbows 45 deg. Steel Butt-welding

731101 ELBOW STEEL BUTT-WELDING SGP, 45DEG LONG RADIUS 15A

IMPA:731101

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731102 ELBOW STEEL BUTT-WELDING SGP, 45DEG LONG RADIUS 20A

IMPA:731102

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731103 ELBOW STEEL BUTT-WELDING SGP, 45DEG LONG RADIUS 25A

IMPA:731103

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731104 ELBOW STEEL BUTT-WELDING SGP, 45DEG LONG RADIUS 32A

IMPA:731104

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731105 ELBOW STEEL BUTT-WELDING SGP, 45DEG LONG RADIUS 40A

IMPA:731105

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731106 ELBOW STEEL BUTT-WELDING SGP, 45DEG LONG RADIUS 50A

IMPA:731106

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731107 ELBOW STEEL BUTT-WELDING SGP, 45DEG LONG RADIUS 65A

IMPA:731107

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731108 ELBOW STEEL BUTT-WELDING SGP, 45DEG LONG RADIUS 80A

IMPA:731108

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731109 ELBOW STEEL BUTT-WELDING SGP, 45DEG LONG RADIUS 90A

IMPA:731109

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731110 ELBOW STEEL BUTT-WELDING SGP, 45DEG LONG RADIUS 100A

IMPA:731110

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731111 ELBOW STEEL BUTT-WELDING SGP, 45DEG LONG RADIUS 125A

IMPA:731111

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731112 ELBOW STEEL BUTT-WELDING SGP, 45DEG LONG RADIUS 150A

IMPA:731112

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731113 ELBOW STEEL BUTT-WELDING SGP, 45DEG LONG RADIUS 200A

IMPA:731113

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731114 ELBOW STEEL BUTT-WELDING SGP, 45DEG LONG RADIUS 250A

IMPA:731114

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731115 ELBOW STEEL BUTT-WELDING SGP, 45DEG LONG RADIUS 300A

IMPA:731115

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731116 ELBOW STEEL BUTT-WELDING SGP, 45DEG SHORT RADIUS 32A

IMPA:731116

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731117 ELBOW STEEL BUTT-WELDING SGP, 45DEG SHORT RADIUS 40A

IMPA:731117

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731118 ELBOW STEEL BUTT-WELDING SGP, 45DEG SHORT RADIUS 50A

IMPA:731118

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731119 ELBOW STEEL BUTT-WELDING SGP, 45DEG SHORT RADIUS 65A

IMPA:731119

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731120 ELBOW STEEL BUTT-WELDING SGP, 45DEG SHORT RADIUS 80A

IMPA:731120

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731136 ELBOW STEEL BUTT-WELDING SGP, 45DEG SHORT RADIUS 90A

IMPA:731136

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731137 ELBOW STEEL BUTT-WELDING SGP, 45DEG SHORT RADIUS 100A

IMPA:731137

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731138 ELBOW STEEL BUTT-WELDING SGP, 45DEG SHORT RADIUS 125A

IMPA:731138

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731139 ELBOW STEEL BUTT-WELDING SGP, 45DEG SHORT RADIUS 150A

IMPA:731139

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731140 ELBOW STEEL BUTT-WELDING SGP, 45DEG SHORT RADIUS 200A

IMPA:731140

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731154 ELBOW STEEL BUTT-WELDING SGP, 45DEG SHORT RADIUS 250A

IMPA:731154

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731155 ELBOW STEEL BUTT-WELDING SGP, 45DEG SHORT RADIUS 300A

IMPA:731155

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).