Elbows 90 deg. Long Radius Steel Butt-welding

731121 ELBOW STEEL BUTT-WELDING SGP, 90DEG LONG RADIUS 15A

IMPA:731121

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731122 ELBOW STEEL BUTT-WELDING SGP, 90DEG LONG RADIUS 20A

IMPA:731122

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731123 ELBOW STEEL BUTT-WELDING SGP, 90DEG LONG RADIUS 25A

IMPA:731123

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731124 ELBOW STEEL BUTT-WELDING SGP, 90DEG LONG RADIUS 32A

IMPA:731124

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731125 ELBOW STEEL BUTT-WELDING SGP, 90DEG LONG RADIUS 40A

IMPA:731125

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731126 ELBOW STEEL BUTT-WELDING SGP, 90DEG LONG RADIUS 50A

IMPA:731126

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731127 ELBOW STEEL BUTT-WELDING SGP, 90DEG LONG RADIUS 65A

IMPA:731127

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731128 ELBOW STEEL BUTT-WELDING SGP, 90DEG LONG RADIUS 80A

IMPA:731128

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731129 ELBOW STEEL BUTT-WELDING SGP, 90DEG LONG RADIUS 90A

IMPA:731129

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731130 ELBOW STEEL BUTT-WELDING SGP, 90DEG LONG RADIUS 100A

IMPA:731130

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731131 ELBOW STEEL BUTT-WELDING SGP, 90DEG LONG RADIUS 125A

IMPA:731131

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731132 ELBOW STEEL BUTT-WELDING SGP, 90DEG LONG RADIUS 150A

IMPA:731132

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731133 ELBOW STEEL BUTT-WELDING SGP, 90DEG LONG RADIUS 200A

IMPA:731133

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731134 ELBOW STEEL BUTT-WELDING SGP, 90DEG LONG RADIUS 250A

IMPA:731134

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).

731135 ELBOW STEEL BUTT-WELDING SGP, 90DEG LONG RADIUS 300A

IMPA:731135

MTML UOM:PCE

Butt-Welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low pressure steam, water, oil, gas and air. Ends are machine faced and bevelled. Available in galvanized or black (ungalvanized) but usually black ones are supplied unless otherwise specified. Their maximum working pressure is 2.5 MPa (25 kgf/cm2).