75. Valves & CocksDIN Pressure Reducing ValvesPressure Reducing Valves Gunmetal & Stainless Steel with Flange Connection
Pressure Reducing Valves Gunmetal & Stainless Steel with Flange Connection
756544 VALVE PRESS. REDUCE W/FLANGE, PN40 GUNMETAL #682MGFO-LP DN15
IMPA:756544
MTML UOM:PCE
Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, Germanischer Lloyd, Lloyds Register. Pressure reducer with flange connection made of gunmetal with pressure-relieved single seal valve and built-in dirt trap. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases, FKM (Fluoroelastomer) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc.., Low pressure: 682/482mGFO-LP EPDM and FKM, Standard pressure: 682/482mGFO-SP EPDM and FKM, High pressure: 682/482mGFO-HP EPDM and FKM. Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm. Seats for version 682: DN20 to DN50 made of gunmetal/brass, DN65 to DN80 made of gunmetal/stainless steel. Primary pressure: up to 30 bar, Secondary pressure: 0.5 - 15 bar. All models also available in Stainless Steel: series 482. Model 682mGFO-LP (Low Pressure)
756545 VALVE PRESS. REDUCE W/FLANGE, PN40 GUNMETAL #682MGFO-SP DN15
IMPA:756545
MTML UOM:PCE
Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, Germanischer Lloyd, Lloyds Register. Pressure reducer with flange connection made of gunmetal with pressure-relieved single seal valve and built-in dirt trap. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases, FKM (Fluoroelastomer) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc.., Low pressure: 682/482mGFO-LP EPDM and FKM, Standard pressure: 682/482mGFO-SP EPDM and FKM, High pressure: 682/482mGFO-HP EPDM and FKM. Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm. Seats for version 682: DN20 to DN50 made of gunmetal/brass, DN65 to DN80 made of gunmetal/stainless steel. Primary pressure: up to 30 bar, Secondary pressure: 0.5 - 15 bar. All models also available in Stainless Steel: series 482. Model 682mGFO-SP (Standard Pressure)
756546 VALVE PRESS REDUCING W/FLANGE, PN40 GUNMETAL 682MGFO-SP DN100
IMPA:756546
MTML UOM:PCE
Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, Germanischer Lloyd, Lloyds Register. Pressure reducer with flange connection made of gunmetal with pressure-relieved single seal valve and built-in dirt trap. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases, FKM (Fluoroelastomer) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc.., Low pressure: 682/482mGFO-LP EPDM and FKM, Standard pressure: 682/482mGFO-SP EPDM and FKM, High pressure: 682/482mGFO-HP EPDM and FKM. Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm. Seats for version 682: DN20 to DN50 made of gunmetal/brass, DN65 to DN80 made of gunmetal/stainless steel. Primary pressure: up to 30 bar, Secondary pressure: 0.5 - 15 bar. All models also available in Stainless Steel: series 482. Model 682mGFO-SP (Standard Pressure)
756547 VALVE PRESS. REDUCE W/FLANGE, PN40 GUNMETAL #682MGFO-HP DN15
IMPA:756547
MTML UOM:PCE
Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, Germanischer Lloyd, Lloyds Register. Pressure reducer with flange connection made of gunmetal with pressure-relieved single seal valve and built-in dirt trap. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases, FKM (Fluoroelastomer) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc.., Low pressure: 682/482mGFO-LP EPDM and FKM, Standard pressure: 682/482mGFO-SP EPDM and FKM, High pressure: 682/482mGFO-HP EPDM and FKM. Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm. Seats for version 682: DN20 to DN50 made of gunmetal/brass, DN65 to DN80 made of gunmetal/stainless steel. Primary pressure: up to 30 bar, Secondary pressure: 0.5 - 15 bar. All models also available in Stainless Steel: series 482. Model 682mGFO-HP (High Pressure)
756548 VALVE PRESS. REDUCE W/FLANGE, PN40 S.STEEL #482MGFO-LP DN15
IMPA:756548
MTML UOM:PCE
Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, Germanischer Lloyd, Lloyds Register. Pressure reducer with flange connection made of gunmetal with pressure-relieved single seal valve and built-in dirt trap. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases, FKM (Fluoroelastomer) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc.., Low pressure: 682/482mGFO-LP EPDM and FKM, Standard pressure: 682/482mGFO-SP EPDM and FKM, High pressure: 682/482mGFO-HP EPDM and FKM. Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm. Seats for version 682: DN20 to DN50 made of gunmetal/brass, DN65 to DN80 made of gunmetal/stainless steel. Primary pressure: up to 30 bar, Secondary pressure: 0.5 - 15 bar. All models also available in Stainless Steel: series 482. Model 482mGFO-LP (Low Pressure)
756549 VALVE PRESS. REDUCE W/FLANGE, PN40 S.STEEL #482MGFO-SP DN15
IMPA:756549
MTML UOM:PCE
Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, Germanischer Lloyd, Lloyds Register. Pressure reducer with flange connection made of gunmetal with pressure-relieved single seal valve and built-in dirt trap. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases, FKM (Fluoroelastomer) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc.., Low pressure: 682/482mGFO-LP EPDM and FKM, Standard pressure: 682/482mGFO-SP EPDM and FKM, High pressure: 682/482mGFO-HP EPDM and FKM. Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm. Seats for version 682: DN20 to DN50 made of gunmetal/brass, DN65 to DN80 made of gunmetal/stainless steel. Primary pressure: up to 30 bar, Secondary pressure: 0.5 - 15 bar. All models also available in Stainless Steel: series 482. Model 482mGFO-SP (Standard Pressure)
756550 VALVE PRESS. REDUCE W/FLANGE, PN40 S.STEEL #482MGFO-HP DN15
IMPA:756550
MTML UOM:PCE
Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, Germanischer Lloyd, Lloyds Register. Pressure reducer with flange connection made of gunmetal with pressure-relieved single seal valve and built-in dirt trap. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases, FKM (Fluoroelastomer) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc.., Low pressure: 682/482mGFO-LP EPDM and FKM, Standard pressure: 682/482mGFO-SP EPDM and FKM, High pressure: 682/482mGFO-HP EPDM and FKM. Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm. Seats for version 682: DN20 to DN50 made of gunmetal/brass, DN65 to DN80 made of gunmetal/stainless steel. Primary pressure: up to 30 bar, Secondary pressure: 0.5 - 15 bar. All models also available in Stainless Steel: series 482. Model 482mGFO-HP (High Pressure)
756551 VALVE PRESS. REDUCE W/FLANGE, PN16 S.STEEL #482MGFO-SP DN65
IMPA:756551
MTML UOM:PCE
Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, Germanischer Lloyd, Lloyds Register. Pressure reducer with flange connection made of gunmetal with pressure-relieved single seal valve and built-in dirt trap. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases, FKM (Fluoroelastomer) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc.., Low pressure: 682/482mGFO-LP EPDM and FKM, Standard pressure: 682/482mGFO-SP EPDM and FKM, High pressure: 682/482mGFO-HP EPDM and FKM. Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm. Seats for version 682: DN20 to DN50 made of gunmetal/brass, DN65 to DN80 made of gunmetal/stainless steel. Primary pressure: up to 30 bar, Secondary pressure: 0.5 - 15 bar. All models also available in Stainless Steel: series 482. Model 482mGFO-SP (Standard Pressure)
756552 VALVE PRESS. REDUCE W/FLANGE, PN40 S.STEEL #482MGFO-SP DN65
IMPA:756552
MTML UOM:PCE
Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, Germanischer Lloyd, Lloyds Register. Pressure reducer with flange connection made of gunmetal with pressure-relieved single seal valve and built-in dirt trap. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases, FKM (Fluoroelastomer) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc.., Low pressure: 682/482mGFO-LP EPDM and FKM, Standard pressure: 682/482mGFO-SP EPDM and FKM, High pressure: 682/482mGFO-HP EPDM and FKM. Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm. Seats for version 682: DN20 to DN50 made of gunmetal/brass, DN65 to DN80 made of gunmetal/stainless steel. Primary pressure: up to 30 bar, Secondary pressure: 0.5 - 15 bar. All models also available in Stainless Steel: series 482. Model 482mGFO-SP (Standard Pressure)
756553 VALVE PRESS. REDUCE W/FLANGE, PN40 S.STEEL #482MGFO-SP DN80
IMPA:756553
MTML UOM:PCE
Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, Germanischer Lloyd, Lloyds Register. Pressure reducer with flange connection made of gunmetal with pressure-relieved single seal valve and built-in dirt trap. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases, FKM (Fluoroelastomer) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc.., Low pressure: 682/482mGFO-LP EPDM and FKM, Standard pressure: 682/482mGFO-SP EPDM and FKM, High pressure: 682/482mGFO-HP EPDM and FKM. Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm. Seats for version 682: DN20 to DN50 made of gunmetal/brass, DN65 to DN80 made of gunmetal/stainless steel. Primary pressure: up to 30 bar, Secondary pressure: 0.5 - 15 bar. All models also available in Stainless Steel: series 482. Model 482mGFO-SP (Standard Pressure)
756554 VALVE PRESS. REDUCE W/FLANGE, PN40 GUNMETAL #682MGFO-LP DN20
IMPA:756554
MTML UOM:PCE
Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, Germanischer Lloyd, Lloyds Register. Pressure reducer with flange connection made of gunmetal with pressure-relieved single seal valve and built-in dirt trap. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases, FKM (Fluoroelastomer) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc.., Low pressure: 682/482mGFO-LP EPDM and FKM, Standard pressure: 682/482mGFO-SP EPDM and FKM, High pressure: 682/482mGFO-HP EPDM and FKM. Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm. Seats for version 682: DN20 to DN50 made of gunmetal/brass, DN65 to DN80 made of gunmetal/stainless steel. Primary pressure: up to 30 bar, Secondary pressure: 0.5 - 15 bar. All models also available in Stainless Steel: series 482. Model 682mGFO-LP (Low Pressure)
756555 VALVE PRESS REDUCING W/FLANGE, PN16 GUNMETAL #682MGFO-SP DN65
IMPA:756555
MTML UOM:PCE
Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, Germanischer Lloyd, Lloyds Register. Pressure reducer with flange connection made of gunmetal with pressure-relieved single seal valve and built-in dirt trap. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases, FKM (Fluoroelastomer) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc.., Low pressure: 682/482mGFO-LP EPDM and FKM, Standard pressure: 682/482mGFO-SP EPDM and FKM, High pressure: 682/482mGFO-HP EPDM and FKM. Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm. Seats for version 682: DN20 to DN50 made of gunmetal/brass, DN65 to DN80 made of gunmetal/stainless steel. Primary pressure: up to 30 bar, Secondary pressure: 0.5 - 15 bar. All models also available in Stainless Steel: series 482. Model 682mGFO-SP (Standard Pressure)
756556 VALVE PRESS REDUCING W/FLANGE, PN40 GUNMETAL #682MGFO-SP DN65
IMPA:756556
MTML UOM:PCE
Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, Germanischer Lloyd, Lloyds Register. Pressure reducer with flange connection made of gunmetal with pressure-relieved single seal valve and built-in dirt trap. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases, FKM (Fluoroelastomer) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc.., Low pressure: 682/482mGFO-LP EPDM and FKM, Standard pressure: 682/482mGFO-SP EPDM and FKM, High pressure: 682/482mGFO-HP EPDM and FKM. Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm. Seats for version 682: DN20 to DN50 made of gunmetal/brass, DN65 to DN80 made of gunmetal/stainless steel. Primary pressure: up to 30 bar, Secondary pressure: 0.5 - 15 bar. All models also available in Stainless Steel: series 482. Model 682mGFO-SP (Standard Pressure)
756557 VALVE PRESS REDUCING W/FLANGE, PN40 GUNMETAL #682MGFO-SP DN80
IMPA:756557
MTML UOM:PCE
Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, Germanischer Lloyd, Lloyds Register. Pressure reducer with flange connection made of gunmetal with pressure-relieved single seal valve and built-in dirt trap. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases, FKM (Fluoroelastomer) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc.., Low pressure: 682/482mGFO-LP EPDM and FKM, Standard pressure: 682/482mGFO-SP EPDM and FKM, High pressure: 682/482mGFO-HP EPDM and FKM. Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm. Seats for version 682: DN20 to DN50 made of gunmetal/brass, DN65 to DN80 made of gunmetal/stainless steel. Primary pressure: up to 30 bar, Secondary pressure: 0.5 - 15 bar. All models also available in Stainless Steel: series 482. Model 682mGFO-SP (Standard Pressure)
756558 VALVE PRESS. REDUCE W/FLANGE, PN40 GUNMETAL #682MGFO-LP DN25
IMPA:756558
MTML UOM:PCE
Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, Germanischer Lloyd, Lloyds Register. Pressure reducer with flange connection made of gunmetal with pressure-relieved single seal valve and built-in dirt trap. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases, FKM (Fluoroelastomer) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc.., Low pressure: 682/482mGFO-LP EPDM and FKM, Standard pressure: 682/482mGFO-SP EPDM and FKM, High pressure: 682/482mGFO-HP EPDM and FKM. Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm. Seats for version 682: DN20 to DN50 made of gunmetal/brass, DN65 to DN80 made of gunmetal/stainless steel. Primary pressure: up to 30 bar, Secondary pressure: 0.5 - 15 bar. All models also available in Stainless Steel: series 482. Model 682mGFO-LP (Low Pressure)
756559 VALVE PRESS. REDUCE W/FLANGE, PN40 GUNMETAL #682MGFO-LP DN32
IMPA:756559
MTML UOM:PCE
Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, Germanischer Lloyd, Lloyds Register. Pressure reducer with flange connection made of gunmetal with pressure-relieved single seal valve and built-in dirt trap. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases, FKM (Fluoroelastomer) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc.., Low pressure: 682/482mGFO-LP EPDM and FKM, Standard pressure: 682/482mGFO-SP EPDM and FKM, High pressure: 682/482mGFO-HP EPDM and FKM. Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm. Seats for version 682: DN20 to DN50 made of gunmetal/brass, DN65 to DN80 made of gunmetal/stainless steel. Primary pressure: up to 30 bar, Secondary pressure: 0.5 - 15 bar. All models also available in Stainless Steel: series 482. Model 682mGFO-LP (Low Pressure)
756560 VALVE PRESS. REDUCE W/FLANGE, PN40 GUNMETAL #682MGFO-LP DN40
IMPA:756560
MTML UOM:PCE
Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, Germanischer Lloyd, Lloyds Register. Pressure reducer with flange connection made of gunmetal with pressure-relieved single seal valve and built-in dirt trap. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases, FKM (Fluoroelastomer) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc.., Low pressure: 682/482mGFO-LP EPDM and FKM, Standard pressure: 682/482mGFO-SP EPDM and FKM, High pressure: 682/482mGFO-HP EPDM and FKM. Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm. Seats for version 682: DN20 to DN50 made of gunmetal/brass, DN65 to DN80 made of gunmetal/stainless steel. Primary pressure: up to 30 bar, Secondary pressure: 0.5 - 15 bar. All models also available in Stainless Steel: series 482. Model 682mGFO-LP (Low Pressure)
756567 VALVE PRESS. REDUCE W/FLANGE, PN40 GUNMETAL #682MGFO-LP DN50
IMPA:756567
MTML UOM:PCE
Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, Germanischer Lloyd, Lloyds Register. Pressure reducer with flange connection made of gunmetal with pressure-relieved single seal valve and built-in dirt trap. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases, FKM (Fluoroelastomer) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc.., Low pressure: 682/482mGFO-LP EPDM and FKM, Standard pressure: 682/482mGFO-SP EPDM and FKM, High pressure: 682/482mGFO-HP EPDM and FKM. Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm. Seats for version 682: DN20 to DN50 made of gunmetal/brass, DN65 to DN80 made of gunmetal/stainless steel. Primary pressure: up to 30 bar, Secondary pressure: 0.5 - 15 bar. All models also available in Stainless Steel: series 482. Model 682mGFO-LP (Low Pressure)
756568 VALVE PRESS. REDUCE W/FLANGE, PN40 GUNMETAL #682MGFO-SP DN20
IMPA:756568
MTML UOM:PCE
Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, Germanischer Lloyd, Lloyds Register. Pressure reducer with flange connection made of gunmetal with pressure-relieved single seal valve and built-in dirt trap. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases, FKM (Fluoroelastomer) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc.., Low pressure: 682/482mGFO-LP EPDM and FKM, Standard pressure: 682/482mGFO-SP EPDM and FKM, High pressure: 682/482mGFO-HP EPDM and FKM. Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm. Seats for version 682: DN20 to DN50 made of gunmetal/brass, DN65 to DN80 made of gunmetal/stainless steel. Primary pressure: up to 30 bar, Secondary pressure: 0.5 - 15 bar. All models also available in Stainless Steel: series 482. Model 682mGFO-SP (Standard Pressure)
756569 VALVE PRESS. REDUCE W/FLANGE, PN40 GUNMETAL #682MGFO-SP DN25
IMPA:756569
MTML UOM:PCE
Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, Germanischer Lloyd, Lloyds Register. Pressure reducer with flange connection made of gunmetal with pressure-relieved single seal valve and built-in dirt trap. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases, FKM (Fluoroelastomer) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc.., Low pressure: 682/482mGFO-LP EPDM and FKM, Standard pressure: 682/482mGFO-SP EPDM and FKM, High pressure: 682/482mGFO-HP EPDM and FKM. Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm. Seats for version 682: DN20 to DN50 made of gunmetal/brass, DN65 to DN80 made of gunmetal/stainless steel. Primary pressure: up to 30 bar, Secondary pressure: 0.5 - 15 bar. All models also available in Stainless Steel: series 482. Model 682mGFO-SP (Standard Pressure)
756570 VALVE PRESS. REDUCE W/FLANGE, PN40 GUNMETAL #682MGFO-SP DN32
IMPA:756570
MTML UOM:PCE
Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, Germanischer Lloyd, Lloyds Register. Pressure reducer with flange connection made of gunmetal with pressure-relieved single seal valve and built-in dirt trap. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases, FKM (Fluoroelastomer) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc.., Low pressure: 682/482mGFO-LP EPDM and FKM, Standard pressure: 682/482mGFO-SP EPDM and FKM, High pressure: 682/482mGFO-HP EPDM and FKM. Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm. Seats for version 682: DN20 to DN50 made of gunmetal/brass, DN65 to DN80 made of gunmetal/stainless steel. Primary pressure: up to 30 bar, Secondary pressure: 0.5 - 15 bar. All models also available in Stainless Steel: series 482. Model 682mGFO-SP (Standard Pressure)
756576 VALVE PRESS. REDUCE W/FLANGE, PN40 GUNMETAL #682MGFO-SP DN40
IMPA:756576
MTML UOM:PCE
Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, Germanischer Lloyd, Lloyds Register. Pressure reducer with flange connection made of gunmetal with pressure-relieved single seal valve and built-in dirt trap. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases, FKM (Fluoroelastomer) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc.., Low pressure: 682/482mGFO-LP EPDM and FKM, Standard pressure: 682/482mGFO-SP EPDM and FKM, High pressure: 682/482mGFO-HP EPDM and FKM. Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm. Seats for version 682: DN20 to DN50 made of gunmetal/brass, DN65 to DN80 made of gunmetal/stainless steel. Primary pressure: up to 30 bar, Secondary pressure: 0.5 - 15 bar. All models also available in Stainless Steel: series 482. Model 682mGFO-SP (Standard Pressure)
756577 VALVE PRESS. REDUCE W/FLANGE, PN40 GUNMETAL #682MGFO-SP DN50
IMPA:756577
MTML UOM:PCE
Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, Germanischer Lloyd, Lloyds Register. Pressure reducer with flange connection made of gunmetal with pressure-relieved single seal valve and built-in dirt trap. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases, FKM (Fluoroelastomer) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc.., Low pressure: 682/482mGFO-LP EPDM and FKM, Standard pressure: 682/482mGFO-SP EPDM and FKM, High pressure: 682/482mGFO-HP EPDM and FKM. Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm. Seats for version 682: DN20 to DN50 made of gunmetal/brass, DN65 to DN80 made of gunmetal/stainless steel. Primary pressure: up to 30 bar, Secondary pressure: 0.5 - 15 bar. All models also available in Stainless Steel: series 482. Model 682mGFO-SP (Standard Pressure)
756578 VALVE PRESS. REDUCE W/FLANGE, PN40 GUNMETAL #682MGFO-HP DN20
IMPA:756578
MTML UOM:PCE
Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, Germanischer Lloyd, Lloyds Register. Pressure reducer with flange connection made of gunmetal with pressure-relieved single seal valve and built-in dirt trap. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases, FKM (Fluoroelastomer) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc.., Low pressure: 682/482mGFO-LP EPDM and FKM, Standard pressure: 682/482mGFO-SP EPDM and FKM, High pressure: 682/482mGFO-HP EPDM and FKM. Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm. Seats for version 682: DN20 to DN50 made of gunmetal/brass, DN65 to DN80 made of gunmetal/stainless steel. Primary pressure: up to 30 bar, Secondary pressure: 0.5 - 15 bar. All models also available in Stainless Steel: series 482. Model 682mGFO-HP (High Pressure)
756579 VALVE PRESS. REDUCE W/FLANGE, PN40 GUNMETAL #682MGFO-HP DN25
IMPA:756579
MTML UOM:PCE
Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, Germanischer Lloyd, Lloyds Register. Pressure reducer with flange connection made of gunmetal with pressure-relieved single seal valve and built-in dirt trap. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases, FKM (Fluoroelastomer) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc.., Low pressure: 682/482mGFO-LP EPDM and FKM, Standard pressure: 682/482mGFO-SP EPDM and FKM, High pressure: 682/482mGFO-HP EPDM and FKM. Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm. Seats for version 682: DN20 to DN50 made of gunmetal/brass, DN65 to DN80 made of gunmetal/stainless steel. Primary pressure: up to 30 bar, Secondary pressure: 0.5 - 15 bar. All models also available in Stainless Steel: series 482. Model 682mGFO-HP (High Pressure)
756580 VALVE PRESS. REDUCE W/FLANGE, PN40 GUNMETAL #682MGFO-HP DN32
IMPA:756580
MTML UOM:PCE
Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, Germanischer Lloyd, Lloyds Register. Pressure reducer with flange connection made of gunmetal with pressure-relieved single seal valve and built-in dirt trap. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases, FKM (Fluoroelastomer) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc.., Low pressure: 682/482mGFO-LP EPDM and FKM, Standard pressure: 682/482mGFO-SP EPDM and FKM, High pressure: 682/482mGFO-HP EPDM and FKM. Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm. Seats for version 682: DN20 to DN50 made of gunmetal/brass, DN65 to DN80 made of gunmetal/stainless steel. Primary pressure: up to 30 bar, Secondary pressure: 0.5 - 15 bar. All models also available in Stainless Steel: series 482. Model 682mGFO-HP (High Pressure)
756581 VALVE PRESS. REDUCE W/FLANGE, PN40 GUNMETAL #682MGFO-HP DN40
IMPA:756581
MTML UOM:PCE
Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, Germanischer Lloyd, Lloyds Register. Pressure reducer with flange connection made of gunmetal with pressure-relieved single seal valve and built-in dirt trap. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases, FKM (Fluoroelastomer) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc.., Low pressure: 682/482mGFO-LP EPDM and FKM, Standard pressure: 682/482mGFO-SP EPDM and FKM, High pressure: 682/482mGFO-HP EPDM and FKM. Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm. Seats for version 682: DN20 to DN50 made of gunmetal/brass, DN65 to DN80 made of gunmetal/stainless steel. Primary pressure: up to 30 bar, Secondary pressure: 0.5 - 15 bar. All models also available in Stainless Steel: series 482. Model 682mGFO-HP (High Pressure)
756582 VALVE PRESS. REDUCE W/FLANGE, PN40 GUNMETAL #682MGFO-HP DN50
IMPA:756582
MTML UOM:PCE
Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, Germanischer Lloyd, Lloyds Register. Pressure reducer with flange connection made of gunmetal with pressure-relieved single seal valve and built-in dirt trap. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases, FKM (Fluoroelastomer) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc.., Low pressure: 682/482mGFO-LP EPDM and FKM, Standard pressure: 682/482mGFO-SP EPDM and FKM, High pressure: 682/482mGFO-HP EPDM and FKM. Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm. Seats for version 682: DN20 to DN50 made of gunmetal/brass, DN65 to DN80 made of gunmetal/stainless steel. Primary pressure: up to 30 bar, Secondary pressure: 0.5 - 15 bar. All models also available in Stainless Steel: series 482. Model 682mGFO-HP (High Pressure)
756583 VALVE PRESS. REDUCE W/FLANGE, PN40 S.STEEL #482MGFO-LP DN20
IMPA:756583
MTML UOM:PCE
Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, Germanischer Lloyd, Lloyds Register. Pressure reducer with flange connection made of gunmetal with pressure-relieved single seal valve and built-in dirt trap. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases, FKM (Fluoroelastomer) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc.., Low pressure: 682/482mGFO-LP EPDM and FKM, Standard pressure: 682/482mGFO-SP EPDM and FKM, High pressure: 682/482mGFO-HP EPDM and FKM. Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm. Seats for version 682: DN20 to DN50 made of gunmetal/brass, DN65 to DN80 made of gunmetal/stainless steel. Primary pressure: up to 30 bar, Secondary pressure: 0.5 - 15 bar. All models also available in Stainless Steel: series 482. Model 482mGFO-LP (Low Pressure)
756584 VALVE PRESS. REDUCE W/FLANGE, PN40 S.STEEL #482MGFO-LP DN25
IMPA:756584
MTML UOM:PCE
Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, Germanischer Lloyd, Lloyds Register. Pressure reducer with flange connection made of gunmetal with pressure-relieved single seal valve and built-in dirt trap. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases, FKM (Fluoroelastomer) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc.., Low pressure: 682/482mGFO-LP EPDM and FKM, Standard pressure: 682/482mGFO-SP EPDM and FKM, High pressure: 682/482mGFO-HP EPDM and FKM. Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm. Seats for version 682: DN20 to DN50 made of gunmetal/brass, DN65 to DN80 made of gunmetal/stainless steel. Primary pressure: up to 30 bar, Secondary pressure: 0.5 - 15 bar. All models also available in Stainless Steel: series 482. Model 482mGFO-LP (Low Pressure)
756585 VALVE PRESS. REDUCE W/FLANGE, PN40 S.STEEL #482MGFO-LP DN32
IMPA:756585
MTML UOM:PCE
Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, Germanischer Lloyd, Lloyds Register. Pressure reducer with flange connection made of gunmetal with pressure-relieved single seal valve and built-in dirt trap. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases, FKM (Fluoroelastomer) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc.., Low pressure: 682/482mGFO-LP EPDM and FKM, Standard pressure: 682/482mGFO-SP EPDM and FKM, High pressure: 682/482mGFO-HP EPDM and FKM. Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm. Seats for version 682: DN20 to DN50 made of gunmetal/brass, DN65 to DN80 made of gunmetal/stainless steel. Primary pressure: up to 30 bar, Secondary pressure: 0.5 - 15 bar. All models also available in Stainless Steel: series 482. Model 482mGFO-LP (Low Pressure)
756586 VALVE PRESS. REDUCE W/FLANGE, PN40 S.STEEL #482MGFO-LP DN40
IMPA:756586
MTML UOM:PCE
Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, Germanischer Lloyd, Lloyds Register. Pressure reducer with flange connection made of gunmetal with pressure-relieved single seal valve and built-in dirt trap. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases, FKM (Fluoroelastomer) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc.., Low pressure: 682/482mGFO-LP EPDM and FKM, Standard pressure: 682/482mGFO-SP EPDM and FKM, High pressure: 682/482mGFO-HP EPDM and FKM. Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm. Seats for version 682: DN20 to DN50 made of gunmetal/brass, DN65 to DN80 made of gunmetal/stainless steel. Primary pressure: up to 30 bar, Secondary pressure: 0.5 - 15 bar. All models also available in Stainless Steel: series 482. Model 482mGFO-LP (Low Pressure)
756587 VALVE PRESS. REDUCE W/FLANGE, PN40 S.STEEL #482MGFO-LP DN50
IMPA:756587
MTML UOM:PCE
Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, Germanischer Lloyd, Lloyds Register. Pressure reducer with flange connection made of gunmetal with pressure-relieved single seal valve and built-in dirt trap. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases, FKM (Fluoroelastomer) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc.., Low pressure: 682/482mGFO-LP EPDM and FKM, Standard pressure: 682/482mGFO-SP EPDM and FKM, High pressure: 682/482mGFO-HP EPDM and FKM. Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm. Seats for version 682: DN20 to DN50 made of gunmetal/brass, DN65 to DN80 made of gunmetal/stainless steel. Primary pressure: up to 30 bar, Secondary pressure: 0.5 - 15 bar. All models also available in Stainless Steel: series 482. Model 482mGFO-LP (Low Pressure)
756588 VALVE PRESS. REDUCE W/FLANGE, PN40 S.STEEL #482MGFO-SP DN20
IMPA:756588
MTML UOM:PCE
Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, Germanischer Lloyd, Lloyds Register. Pressure reducer with flange connection made of gunmetal with pressure-relieved single seal valve and built-in dirt trap. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases, FKM (Fluoroelastomer) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc.., Low pressure: 682/482mGFO-LP EPDM and FKM, Standard pressure: 682/482mGFO-SP EPDM and FKM, High pressure: 682/482mGFO-HP EPDM and FKM. Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm. Seats for version 682: DN20 to DN50 made of gunmetal/brass, DN65 to DN80 made of gunmetal/stainless steel. Primary pressure: up to 30 bar, Secondary pressure: 0.5 - 15 bar. All models also available in Stainless Steel: series 482. Model 482mGFO-SP (Standard Pressure)
756599 VALVE PRESS. REDUCE W/FLANGE, PN40 S.STEEL #482MGFO-SP DN25
IMPA:756599
MTML UOM:PCE
Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, Germanischer Lloyd, Lloyds Register. Pressure reducer with flange connection made of gunmetal with pressure-relieved single seal valve and built-in dirt trap. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases, FKM (Fluoroelastomer) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc.., Low pressure: 682/482mGFO-LP EPDM and FKM, Standard pressure: 682/482mGFO-SP EPDM and FKM, High pressure: 682/482mGFO-HP EPDM and FKM. Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm. Seats for version 682: DN20 to DN50 made of gunmetal/brass, DN65 to DN80 made of gunmetal/stainless steel. Primary pressure: up to 30 bar, Secondary pressure: 0.5 - 15 bar. All models also available in Stainless Steel: series 482. Model 482mGFO-SP (Standard Pressure)
756600 VALVE PRESS. REDUCE W/FLANGE, PN40 S.STEEL #482MGFO-SP DN32
IMPA:756600
MTML UOM:PCE
Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, Germanischer Lloyd, Lloyds Register. Pressure reducer with flange connection made of gunmetal with pressure-relieved single seal valve and built-in dirt trap. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases, FKM (Fluoroelastomer) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc.., Low pressure: 682/482mGFO-LP EPDM and FKM, Standard pressure: 682/482mGFO-SP EPDM and FKM, High pressure: 682/482mGFO-HP EPDM and FKM. Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm. Seats for version 682: DN20 to DN50 made of gunmetal/brass, DN65 to DN80 made of gunmetal/stainless steel. Primary pressure: up to 30 bar, Secondary pressure: 0.5 - 15 bar. All models also available in Stainless Steel: series 482. Model 482mGFO-SP (Standard Pressure)
756612 VALVE PRESS. REDUCE W/FLANGE, PN40 S.STEEL #482MGFO-SP DN40
IMPA:756612
MTML UOM:PCE
Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, Germanischer Lloyd, Lloyds Register. Pressure reducer with flange connection made of gunmetal with pressure-relieved single seal valve and built-in dirt trap. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases, FKM (Fluoroelastomer) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc.., Low pressure: 682/482mGFO-LP EPDM and FKM, Standard pressure: 682/482mGFO-SP EPDM and FKM, High pressure: 682/482mGFO-HP EPDM and FKM. Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm. Seats for version 682: DN20 to DN50 made of gunmetal/brass, DN65 to DN80 made of gunmetal/stainless steel. Primary pressure: up to 30 bar, Secondary pressure: 0.5 - 15 bar. All models also available in Stainless Steel: series 482. Model 482mGFO-SP (Standard Pressure)
756613 VALVE PRESS. REDUCE W/FLANGE, PN40 S.STEEL #482MGFO-SP DN50
IMPA:756613
MTML UOM:PCE
Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, Germanischer Lloyd, Lloyds Register. Pressure reducer with flange connection made of gunmetal with pressure-relieved single seal valve and built-in dirt trap. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases, FKM (Fluoroelastomer) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc.., Low pressure: 682/482mGFO-LP EPDM and FKM, Standard pressure: 682/482mGFO-SP EPDM and FKM, High pressure: 682/482mGFO-HP EPDM and FKM. Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm. Seats for version 682: DN20 to DN50 made of gunmetal/brass, DN65 to DN80 made of gunmetal/stainless steel. Primary pressure: up to 30 bar, Secondary pressure: 0.5 - 15 bar. All models also available in Stainless Steel: series 482. Model 482mGFO-SP (Standard Pressure)
756614 VALVE PRESS. REDUCE W/FLANGE, PN40 S.STEEL #482MGFO-HP DN20
IMPA:756614
MTML UOM:PCE
Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, Germanischer Lloyd, Lloyds Register. Pressure reducer with flange connection made of gunmetal with pressure-relieved single seal valve and built-in dirt trap. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases, FKM (Fluoroelastomer) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc.., Low pressure: 682/482mGFO-LP EPDM and FKM, Standard pressure: 682/482mGFO-SP EPDM and FKM, High pressure: 682/482mGFO-HP EPDM and FKM. Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm. Seats for version 682: DN20 to DN50 made of gunmetal/brass, DN65 to DN80 made of gunmetal/stainless steel. Primary pressure: up to 30 bar, Secondary pressure: 0.5 - 15 bar. All models also available in Stainless Steel: series 482. Model 482mGFO-HP (High Pressure)
756623 VALVE PRESS. REDUCE W/FLANGE, PN40 S.STEEL #482MGFO-HP DN25
IMPA:756623
MTML UOM:PCE
Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, Germanischer Lloyd, Lloyds Register. Pressure reducer with flange connection made of gunmetal with pressure-relieved single seal valve and built-in dirt trap. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases, FKM (Fluoroelastomer) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc.., Low pressure: 682/482mGFO-LP EPDM and FKM, Standard pressure: 682/482mGFO-SP EPDM and FKM, High pressure: 682/482mGFO-HP EPDM and FKM. Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm. Seats for version 682: DN20 to DN50 made of gunmetal/brass, DN65 to DN80 made of gunmetal/stainless steel. Primary pressure: up to 30 bar, Secondary pressure: 0.5 - 15 bar. All models also available in Stainless Steel: series 482. Model 482mGFO-HP (High Pressure)
756624 VALVE PRESS. REDUCE W/FLANGE, PN40 S.STEEL #482MGFO-HP DN32
IMPA:756624
MTML UOM:PCE
Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, Germanischer Lloyd, Lloyds Register. Pressure reducer with flange connection made of gunmetal with pressure-relieved single seal valve and built-in dirt trap. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases, FKM (Fluoroelastomer) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc.., Low pressure: 682/482mGFO-LP EPDM and FKM, Standard pressure: 682/482mGFO-SP EPDM and FKM, High pressure: 682/482mGFO-HP EPDM and FKM. Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm. Seats for version 682: DN20 to DN50 made of gunmetal/brass, DN65 to DN80 made of gunmetal/stainless steel. Primary pressure: up to 30 bar, Secondary pressure: 0.5 - 15 bar. All models also available in Stainless Steel: series 482. Model 482mGFO-HP (High Pressure)
756633 VALVE PRESS. REDUCE W/FLANGE, PN40 S.STEEL #482MGFO-HP DN40
IMPA:756633
MTML UOM:PCE
Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, Germanischer Lloyd, Lloyds Register. Pressure reducer with flange connection made of gunmetal with pressure-relieved single seal valve and built-in dirt trap. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases, FKM (Fluoroelastomer) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc.., Low pressure: 682/482mGFO-LP EPDM and FKM, Standard pressure: 682/482mGFO-SP EPDM and FKM, High pressure: 682/482mGFO-HP EPDM and FKM. Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm. Seats for version 682: DN20 to DN50 made of gunmetal/brass, DN65 to DN80 made of gunmetal/stainless steel. Primary pressure: up to 30 bar, Secondary pressure: 0.5 - 15 bar. All models also available in Stainless Steel: series 482. Model 482mGFO-HP (High Pressure)
756634 VALVE PRESS. REDUCE W/FLANGE, PN40 S.STEEL #482MGFO-HP DN50
IMPA:756634
MTML UOM:PCE
Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, Germanischer Lloyd, Lloyds Register. Pressure reducer with flange connection made of gunmetal with pressure-relieved single seal valve and built-in dirt trap. The pressure can be adjusted via a non-rising valve stem. Flange connection according to DIN EN 1092-3. Pressure reducer equipped with pressure gauge ports; gauge connection G 1/4”. Available three models with EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases, FKM (Fluoroelastomer) seal suitable for non-neutral media i.e. oils, fuels, oil-laden compressed air, etc.., Low pressure: 682/482mGFO-LP EPDM and FKM, Standard pressure: 682/482mGFO-SP EPDM and FKM, High pressure: 682/482mGFO-HP EPDM and FKM. Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm. Seats for version 682: DN20 to DN50 made of gunmetal/brass, DN65 to DN80 made of gunmetal/stainless steel. Primary pressure: up to 30 bar, Secondary pressure: 0.5 - 15 bar. All models also available in Stainless Steel: series 482. Model 482mGFO-HP (High Pressure)
© 2025 ShipServ Limited