Overflow Valves Gunmetal & Stainless Steel

757161 VALVE OVERFLOW GUNMETAL DIN, #617TGFO G3/8"

IMPA:757161

MTML UOM:PCE

Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, DNV, Germanischer Lloyd, Lloyds Register. Overflow and control valves made of gunmetal with stainless steel spring. Suitable for liquids, steam and gaseous media. Adjustable under operating conditions without medium escaping in the atmosphere. Gastight version of spring housing. Available models: 617tGFO gastight version for gases and liquids, without lifting device. Available seals: NBR, FKM, PTFE. Ranges of adjustment: 0.5 – 2.5 bar, 2.0 – 8.0 bar, 2.0 – 12 bar, 12 – 20 bar (with PTFE seal). Valves can be delivered unset within a pressure range or set and sealed at the factory. All models are also available in Stainless Steel: series 417. Series 617 (Gunmetal) Model 617tGFO gastight version for gases and liquids, without lifting device

757162 VALVE OVERFLOW GUNMETAL DIN, #617TGFO G1/2"

IMPA:757162

MTML UOM:PCE

Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, DNV, Germanischer Lloyd, Lloyds Register. Overflow and control valves made of gunmetal with stainless steel spring. Suitable for liquids, steam and gaseous media. Adjustable under operating conditions without medium escaping in the atmosphere. Gastight version of spring housing. Available models: 617tGFO gastight version for gases and liquids, without lifting device. Available seals: NBR, FKM, PTFE. Ranges of adjustment: 0.5 – 2.5 bar, 2.0 – 8.0 bar, 2.0 – 12 bar, 12 – 20 bar (with PTFE seal). Valves can be delivered unset within a pressure range or set and sealed at the factory. All models are also available in Stainless Steel: series 417. Series 617 (Gunmetal) Model 617tGFO gastight version for gases and liquids, without lifting device

757163 VALVE OVERFLOW GUNMETAL DIN, #617TGFO G3/4"

IMPA:757163

MTML UOM:PCE

Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, DNV, Germanischer Lloyd, Lloyds Register. Overflow and control valves made of gunmetal with stainless steel spring. Suitable for liquids, steam and gaseous media. Adjustable under operating conditions without medium escaping in the atmosphere. Gastight version of spring housing. Available models: 617tGFO gastight version for gases and liquids, without lifting device. Available seals: NBR, FKM, PTFE. Ranges of adjustment: 0.5 – 2.5 bar, 2.0 – 8.0 bar, 2.0 – 12 bar, 12 – 20 bar (with PTFE seal). Valves can be delivered unset within a pressure range or set and sealed at the factory. All models are also available in Stainless Steel: series 417. Series 617 (Gunmetal) Model 617tGFO gastight version for gases and liquids, without lifting device

757164 VALVE OVERFLOW GUNMETAL DIN, #617TGFO G1"

IMPA:757164

MTML UOM:PCE

Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, DNV, Germanischer Lloyd, Lloyds Register. Overflow and control valves made of gunmetal with stainless steel spring. Suitable for liquids, steam and gaseous media. Adjustable under operating conditions without medium escaping in the atmosphere. Gastight version of spring housing. Available models: 617tGFO gastight version for gases and liquids, without lifting device. Available seals: NBR, FKM, PTFE. Ranges of adjustment: 0.5 – 2.5 bar, 2.0 – 8.0 bar, 2.0 – 12 bar, 12 – 20 bar (with PTFE seal). Valves can be delivered unset within a pressure range or set and sealed at the factory. All models are also available in Stainless Steel: series 417. Series 617 (Gunmetal) Model 617tGFO gastight version for gases and liquids, without lifting device

757165 VALVE OVERFLOW GUNMETAL DIN, #617TGFO G1-1/4"

IMPA:757165

MTML UOM:PCE

Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, DNV, Germanischer Lloyd, Lloyds Register. Overflow and control valves made of gunmetal with stainless steel spring. Suitable for liquids, steam and gaseous media. Adjustable under operating conditions without medium escaping in the atmosphere. Gastight version of spring housing. Available models: 617tGFO gastight version for gases and liquids, without lifting device. Available seals: NBR, FKM, PTFE. Ranges of adjustment: 0.5 – 2.5 bar, 2.0 – 8.0 bar, 2.0 – 12 bar, 12 – 20 bar (with PTFE seal). Valves can be delivered unset within a pressure range or set and sealed at the factory. All models are also available in Stainless Steel: series 417. Series 617 (Gunmetal) Model 617tGFO gastight version for gases and liquids, without lifting device

757166 VALVE OVERFLOW GUNMETAL DIN, #617TGFO G1-1/2"

IMPA:757166

MTML UOM:PCE

Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, DNV, Germanischer Lloyd, Lloyds Register. Overflow and control valves made of gunmetal with stainless steel spring. Suitable for liquids, steam and gaseous media. Adjustable under operating conditions without medium escaping in the atmosphere. Gastight version of spring housing. Available models: 617tGFO gastight version for gases and liquids, without lifting device. Available seals: NBR, FKM, PTFE. Ranges of adjustment: 0.5 – 2.5 bar, 2.0 – 8.0 bar, 2.0 – 12 bar, 12 – 20 bar (with PTFE seal). Valves can be delivered unset within a pressure range or set and sealed at the factory. All models are also available in Stainless Steel: series 417. Series 617 (Gunmetal) Model 617tGFO gastight version for gases and liquids, without lifting device

757167 VALVE OVERFLOW GUNMETAL DIN, #617TGFO G2"

IMPA:757167

MTML UOM:PCE

Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, DNV, Germanischer Lloyd, Lloyds Register. Overflow and control valves made of gunmetal with stainless steel spring. Suitable for liquids, steam and gaseous media. Adjustable under operating conditions without medium escaping in the atmosphere. Gastight version of spring housing. Available models: 617tGFO gastight version for gases and liquids, without lifting device. Available seals: NBR, FKM, PTFE. Ranges of adjustment: 0.5 – 2.5 bar, 2.0 – 8.0 bar, 2.0 – 12 bar, 12 – 20 bar (with PTFE seal). Valves can be delivered unset within a pressure range or set and sealed at the factory. All models are also available in Stainless Steel: series 417. Series 617 (Gunmetal) Model 617tGFO gastight version for gases and liquids, without lifting device

757168 VALVE OVERFLOW S.STEEL DIN, #417TGFO G3/8"

IMPA:757168

MTML UOM:PCE

Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, DNV, Germanischer Lloyd, Lloyds Register. Overflow and control valves made of gunmetal with stainless steel spring. Suitable for liquids, steam and gaseous media. Adjustable under operating conditions without medium escaping in the atmosphere. Gastight version of spring housing. Available models: 617tGFO gastight version for gases and liquids, without lifting device. Available seals: NBR, FKM, PTFE. Ranges of adjustment: 0.5 – 2.5 bar, 2.0 – 8.0 bar, 2.0 – 12 bar, 12 – 20 bar (with PTFE seal). Valves can be delivered unset within a pressure range or set and sealed at the factory. All models are also available in Stainless Steel: Series 417 (Stainless Steel): Model 417tGFO gastight version for gases and liquids, without lifting device

757169 VALVE OVERFLOW S.STEEL DIN, #417TGFO G1/2"

IMPA:757169

MTML UOM:PCE

Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, DNV, Germanischer Lloyd, Lloyds Register. Overflow and control valves made of gunmetal with stainless steel spring. Suitable for liquids, steam and gaseous media. Adjustable under operating conditions without medium escaping in the atmosphere. Gastight version of spring housing. Available models: 617tGFO gastight version for gases and liquids, without lifting device. Available seals: NBR, FKM, PTFE. Ranges of adjustment: 0.5 – 2.5 bar, 2.0 – 8.0 bar, 2.0 – 12 bar, 12 – 20 bar (with PTFE seal). Valves can be delivered unset within a pressure range or set and sealed at the factory. All models are also available in Stainless Steel: Series 417 (Stainless Steel): Model 417tGFO gastight version for gases and liquids, without lifting device

757170 VALVE OVERFLOW S.STEEL DIN, #417TGFO G3/4"

IMPA:757170

MTML UOM:PCE

Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, DNV, Germanischer Lloyd, Lloyds Register. Overflow and control valves made of gunmetal with stainless steel spring. Suitable for liquids, steam and gaseous media. Adjustable under operating conditions without medium escaping in the atmosphere. Gastight version of spring housing. Available models: 617tGFO gastight version for gases and liquids, without lifting device. Available seals: NBR, FKM, PTFE. Ranges of adjustment: 0.5 – 2.5 bar, 2.0 – 8.0 bar, 2.0 – 12 bar, 12 – 20 bar (with PTFE seal). Valves can be delivered unset within a pressure range or set and sealed at the factory. All models are also available in Stainless Steel: Series 417 (Stainless Steel): Model 417tGFO gastight version for gases and liquids, without lifting device

757171 VALVE OVERFLOW S.STEEL DIN, #417TGFO G1"

IMPA:757171

MTML UOM:PCE

Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, DNV, Germanischer Lloyd, Lloyds Register. Overflow and control valves made of gunmetal with stainless steel spring. Suitable for liquids, steam and gaseous media. Adjustable under operating conditions without medium escaping in the atmosphere. Gastight version of spring housing. Available models: 617tGFO gastight version for gases and liquids, without lifting device. Available seals: NBR, FKM, PTFE. Ranges of adjustment: 0.5 – 2.5 bar, 2.0 – 8.0 bar, 2.0 – 12 bar, 12 – 20 bar (with PTFE seal). Valves can be delivered unset within a pressure range or set and sealed at the factory. All models are also available in Stainless Steel: Series 417 (Stainless Steel): Model 417tGFO gastight version for gases and liquids, without lifting device

757172 VALVE OVERFLOW S.STEEL DIN, #417TGFO G1-1/4"

IMPA:757172

MTML UOM:PCE

Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, DNV, Germanischer Lloyd, Lloyds Register. Overflow and control valves made of gunmetal with stainless steel spring. Suitable for liquids, steam and gaseous media. Adjustable under operating conditions without medium escaping in the atmosphere. Gastight version of spring housing. Available models: 617tGFO gastight version for gases and liquids, without lifting device. Available seals: NBR, FKM, PTFE. Ranges of adjustment: 0.5 – 2.5 bar, 2.0 – 8.0 bar, 2.0 – 12 bar, 12 – 20 bar (with PTFE seal). Valves can be delivered unset within a pressure range or set and sealed at the factory. All models are also available in Stainless Steel: Series 417 (Stainless Steel): Model 417tGFO gastight version for gases and liquids, without lifting device

757173 VALVE OVERFLOW S.STEEL DIN, #417TGFO G1-1/2"

IMPA:757173

MTML UOM:PCE

Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, DNV, Germanischer Lloyd, Lloyds Register. Overflow and control valves made of gunmetal with stainless steel spring. Suitable for liquids, steam and gaseous media. Adjustable under operating conditions without medium escaping in the atmosphere. Gastight version of spring housing. Available models: 617tGFO gastight version for gases and liquids, without lifting device. Available seals: NBR, FKM, PTFE. Ranges of adjustment: 0.5 – 2.5 bar, 2.0 – 8.0 bar, 2.0 – 12 bar, 12 – 20 bar (with PTFE seal). Valves can be delivered unset within a pressure range or set and sealed at the factory. All models are also available in Stainless Steel: Series 417 (Stainless Steel): Model 417tGFO gastight version for gases and liquids, without lifting device

757174 VALVE OVERFLOW S.STEEL DIN, #417TGFO G2"

IMPA:757174

MTML UOM:PCE

Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, DNV, Germanischer Lloyd, Lloyds Register. Overflow and control valves made of gunmetal with stainless steel spring. Suitable for liquids, steam and gaseous media. Adjustable under operating conditions without medium escaping in the atmosphere. Gastight version of spring housing. Available models: 617tGFO gastight version for gases and liquids, without lifting device. Available seals: NBR, FKM, PTFE. Ranges of adjustment: 0.5 – 2.5 bar, 2.0 – 8.0 bar, 2.0 – 12 bar, 12 – 20 bar (with PTFE seal). Valves can be delivered unset within a pressure range or set and sealed at the factory. All models are also available in Stainless Steel: Series 417 (Stainless Steel): Model 417tGFO gastight version for gases and liquids, without lifting device

757187 VALVE OVERFLOW GUNMETAL, #630MGFO DIN 15

IMPA:757187

MTML UOM:PCE

Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, DNV, Germanischer Lloyd, Lloyds Register. Overflow and control valves made of gunmetal with spring made of spring steel with anti-rust protection with threaded connections. With EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases. Standard thread: BSPTm also available in female BSP-P for sizes up to 1” (PLEASE CLEARLY INDICATE IN THE ORDER:“f/f” or “BSPTm/BSPTm”). Valves can be delivered unset within a pressure range or set and sealed at the factory (against surcharge). Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm, Set pressure : 0.5 – 10 bar, Ranges of adjustment: 0.5 – 2 bar, 1.5 – 6 bar, 5.5 – 10 bar. Use: Suitable for water up to 95oC. Available seals : EPDM, FKM. Also available in Stainless Steel: series 430. Series 630 (Gunmetal):

757188 VALVE OVERFLOW GUNMETAL, #630MGFO DIN 20

IMPA:757188

MTML UOM:PCE

Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, DNV, Germanischer Lloyd, Lloyds Register. Overflow and control valves made of gunmetal with spring made of spring steel with anti-rust protection with threaded connections. With EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases. Standard thread: BSPTm also available in female BSP-P for sizes up to 1” (PLEASE CLEARLY INDICATE IN THE ORDER:“f/f” or “BSPTm/BSPTm”). Valves can be delivered unset within a pressure range or set and sealed at the factory (against surcharge). Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm, Set pressure : 0.5 – 10 bar, Ranges of adjustment: 0.5 – 2 bar, 1.5 – 6 bar, 5.5 – 10 bar. Use: Suitable for water up to 95oC. Available seals : EPDM, FKM. Also available in Stainless Steel: series 430. Series 630 (Gunmetal):

757189 VALVE OVERFLOW GUNMETAL, #630MGFO DIN 25

IMPA:757189

MTML UOM:PCE

Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, DNV, Germanischer Lloyd, Lloyds Register. Overflow and control valves made of gunmetal with spring made of spring steel with anti-rust protection with threaded connections. With EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases. Standard thread: BSPTm also available in female BSP-P for sizes up to 1” (PLEASE CLEARLY INDICATE IN THE ORDER:“f/f” or “BSPTm/BSPTm”). Valves can be delivered unset within a pressure range or set and sealed at the factory (against surcharge). Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm, Set pressure : 0.5 – 10 bar, Ranges of adjustment: 0.5 – 2 bar, 1.5 – 6 bar, 5.5 – 10 bar. Use: Suitable for water up to 95oC. Available seals : EPDM, FKM. Also available in Stainless Steel: series 430. Series 630 (Gunmetal):

757190 VALVE OVERFLOW GUNMETAL, #630MGFO DIN 32

IMPA:757190

MTML UOM:PCE

Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, DNV, Germanischer Lloyd, Lloyds Register. Overflow and control valves made of gunmetal with spring made of spring steel with anti-rust protection with threaded connections. With EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases. Standard thread: BSPTm also available in female BSP-P for sizes up to 1” (PLEASE CLEARLY INDICATE IN THE ORDER:“f/f” or “BSPTm/BSPTm”). Valves can be delivered unset within a pressure range or set and sealed at the factory (against surcharge). Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm, Set pressure : 0.5 – 10 bar, Ranges of adjustment: 0.5 – 2 bar, 1.5 – 6 bar, 5.5 – 10 bar. Use: Suitable for water up to 95oC. Available seals : EPDM, FKM. Also available in Stainless Steel: series 430. Series 630 (Gunmetal):

757191 VALVE OVERFLOW GUNMETAL, #630MGFO DIN 40

IMPA:757191

MTML UOM:PCE

Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, DNV, Germanischer Lloyd, Lloyds Register. Overflow and control valves made of gunmetal with spring made of spring steel with anti-rust protection with threaded connections. With EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases. Standard thread: BSPTm also available in female BSP-P for sizes up to 1” (PLEASE CLEARLY INDICATE IN THE ORDER:“f/f” or “BSPTm/BSPTm”). Valves can be delivered unset within a pressure range or set and sealed at the factory (against surcharge). Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm, Set pressure : 0.5 – 10 bar, Ranges of adjustment: 0.5 – 2 bar, 1.5 – 6 bar, 5.5 – 10 bar. Use: Suitable for water up to 95oC. Available seals : EPDM, FKM. Also available in Stainless Steel: series 430. Series 630 (Gunmetal):

757192 VALVE OVERFLOW GUNMETAL, #630MGFO DIN 50

IMPA:757192

MTML UOM:PCE

Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, DNV, Germanischer Lloyd, Lloyds Register. Overflow and control valves made of gunmetal with spring made of spring steel with anti-rust protection with threaded connections. With EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases. Standard thread: BSPTm also available in female BSP-P for sizes up to 1” (PLEASE CLEARLY INDICATE IN THE ORDER:“f/f” or “BSPTm/BSPTm”). Valves can be delivered unset within a pressure range or set and sealed at the factory (against surcharge). Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm, Set pressure : 0.5 – 10 bar, Ranges of adjustment: 0.5 – 2 bar, 1.5 – 6 bar, 5.5 – 10 bar. Use: Suitable for water up to 95oC. Available seals : EPDM, FKM. Also available in Stainless Steel: series 430. Series 630 (Gunmetal):

757193 VALVE OVERFLOW S.STEEL, #430MGFO DIN 15

IMPA:757193

MTML UOM:PCE

Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, DNV, Germanischer Lloyd, Lloyds Register. Overflow and control valves made of gunmetal with spring made of spring steel with anti-rust protection with threaded connections. With EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases. Standard thread: BSPTm also available in female BSP-P for sizes up to 1” (PLEASE CLEARLY INDICATE IN THE ORDER:“f/f” or “BSPTm/BSPTm”). Valves can be delivered unset within a pressure range or set and sealed at the factory (against surcharge). Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm, Set pressure : 0.5 – 10 bar, Ranges of adjustment: 0.5 – 2 bar, 1.5 – 6 bar, 5.5 – 10 bar. Use: Suitable for water up to 95oC. Available seals : EPDM, FKM. Also available in Stainless Steel: series 430. Series 630 (Gunmetal):

757194 VALVE OVERFLOW S.STEEL, #430MGFO DIN 20

IMPA:757194

MTML UOM:PCE

Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, DNV, Germanischer Lloyd, Lloyds Register. Overflow and control valves made of gunmetal with spring made of spring steel with anti-rust protection with threaded connections. With EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases. Standard thread: BSPTm also available in female BSP-P for sizes up to 1” (PLEASE CLEARLY INDICATE IN THE ORDER:“f/f” or “BSPTm/BSPTm”). Valves can be delivered unset within a pressure range or set and sealed at the factory (against surcharge). Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm, Set pressure : 0.5 – 10 bar, Ranges of adjustment: 0.5 – 2 bar, 1.5 – 6 bar, 5.5 – 10 bar. Use: Suitable for water up to 95oC. Available seals : EPDM, FKM. Also available in Stainless Steel: series 430. Series 630 (Gunmetal):

757195 VALVE OVERFLOW S.STEEL, #430MGFO DIN 25

IMPA:757195

MTML UOM:PCE

Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, DNV, Germanischer Lloyd, Lloyds Register. Overflow and control valves made of gunmetal with spring made of spring steel with anti-rust protection with threaded connections. With EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases. Standard thread: BSPTm also available in female BSP-P for sizes up to 1” (PLEASE CLEARLY INDICATE IN THE ORDER:“f/f” or “BSPTm/BSPTm”). Valves can be delivered unset within a pressure range or set and sealed at the factory (against surcharge). Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm, Set pressure : 0.5 – 10 bar, Ranges of adjustment: 0.5 – 2 bar, 1.5 – 6 bar, 5.5 – 10 bar. Use: Suitable for water up to 95oC. Available seals : EPDM, FKM. Also available in Stainless Steel: series 430. Series 630 (Gunmetal):

757196 VALVE OVERFLOW S.STEEL, #430MGFO DIN 32

IMPA:757196

MTML UOM:PCE

Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, DNV, Germanischer Lloyd, Lloyds Register. Overflow and control valves made of gunmetal with spring made of spring steel with anti-rust protection with threaded connections. With EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases. Standard thread: BSPTm also available in female BSP-P for sizes up to 1” (PLEASE CLEARLY INDICATE IN THE ORDER:“f/f” or “BSPTm/BSPTm”). Valves can be delivered unset within a pressure range or set and sealed at the factory (against surcharge). Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm, Set pressure : 0.5 – 10 bar, Ranges of adjustment: 0.5 – 2 bar, 1.5 – 6 bar, 5.5 – 10 bar. Use: Suitable for water up to 95oC. Available seals : EPDM, FKM. Also available in Stainless Steel: series 430. Series 630 (Gunmetal):

757197 VALVE OVERFLOW S.STEEL, #430MGFO DIN 40

IMPA:757197

MTML UOM:PCE

Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, DNV, Germanischer Lloyd, Lloyds Register. Overflow and control valves made of gunmetal with spring made of spring steel with anti-rust protection with threaded connections. With EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases. Standard thread: BSPTm also available in female BSP-P for sizes up to 1” (PLEASE CLEARLY INDICATE IN THE ORDER:“f/f” or “BSPTm/BSPTm”). Valves can be delivered unset within a pressure range or set and sealed at the factory (against surcharge). Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm, Set pressure : 0.5 – 10 bar, Ranges of adjustment: 0.5 – 2 bar, 1.5 – 6 bar, 5.5 – 10 bar. Use: Suitable for water up to 95oC. Available seals : EPDM, FKM. Also available in Stainless Steel: series 430. Series 630 (Gunmetal):

757198 VALVE OVERFLOW S.STEEL, #430MGFO DIN 50

IMPA:757198

MTML UOM:PCE

Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, DNV, Germanischer Lloyd, Lloyds Register. Overflow and control valves made of gunmetal with spring made of spring steel with anti-rust protection with threaded connections. With EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases. Standard thread: BSPTm also available in female BSP-P for sizes up to 1” (PLEASE CLEARLY INDICATE IN THE ORDER:“f/f” or “BSPTm/BSPTm”). Valves can be delivered unset within a pressure range or set and sealed at the factory (against surcharge). Mesh sizes: G 1/2” to G 1-1/4” = 0.6 mm, DN40 and DN50 = 0.75 mm, Set pressure : 0.5 – 10 bar, Ranges of adjustment: 0.5 – 2 bar, 1.5 – 6 bar, 5.5 – 10 bar. Use: Suitable for water up to 95oC. Available seals : EPDM, FKM. Also available in Stainless Steel: series 430. Series 630 (Gunmetal):

757199 VALVE OVERFLOW GUNMETAL, PN40 #631MGFO DIN 15

IMPA:757199

MTML UOM:PCE

Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, DNV, Germanischer Lloyd, Lloyds Register. Overflow and control valves made of gunmetal with spring made of spring steel with anti-rust protection with flange connections. With EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases. Set pressure: 0.5 – 10 bar. Ranges of adjustment: 0.5 – 2 bar (not DN65 and larger), 1,5 – 6 bar, 1,5 – 5,5 bar (DN100), 5,5 – 10 bar (not DN65 and larger), Available seals: EPDM, FKM. Also available in Stainless Steel : series 431.

757200 VALVE OVERFLOW GUNMETAL, PN16 #631MGFO DIN 100

IMPA:757200

MTML UOM:PCE

Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, DNV, Germanischer Lloyd, Lloyds Register. Overflow and control valves made of gunmetal with spring made of spring steel with anti-rust protection with flange connections. With EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases. Set pressure: 0.5 – 10 bar. Ranges of adjustment: 0.5 – 2 bar (not DN65 and larger), 1,5 – 6 bar, 1,5 – 5,5 bar (DN100), 5,5 – 10 bar (not DN65 and larger), Available seals: EPDM, FKM. Also available in Stainless Steel : series 431.

757209 VALVE OVERFLOW GUNMETAL, PN40 #631MGFO DIN 20

IMPA:757209

MTML UOM:PCE

Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, DNV, Germanischer Lloyd, Lloyds Register. Overflow and control valves made of gunmetal with spring made of spring steel with anti-rust protection with flange connections. With EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases. Set pressure: 0.5 – 10 bar. Ranges of adjustment: 0.5 – 2 bar (not DN65 and larger), 1,5 – 6 bar, 1,5 – 5,5 bar (DN100), 5,5 – 10 bar (not DN65 and larger), Available seals: EPDM, FKM. Also available in Stainless Steel : series 431.

757210 VALVE OVERFLOW GUNMETAL, PN40 #631MGFO DIN 25

IMPA:757210

MTML UOM:PCE

Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, DNV, Germanischer Lloyd, Lloyds Register. Overflow and control valves made of gunmetal with spring made of spring steel with anti-rust protection with flange connections. With EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases. Set pressure: 0.5 – 10 bar. Ranges of adjustment: 0.5 – 2 bar (not DN65 and larger), 1,5 – 6 bar, 1,5 – 5,5 bar (DN100), 5,5 – 10 bar (not DN65 and larger), Available seals: EPDM, FKM. Also available in Stainless Steel : series 431.

757218 VALVE OVERFLOW GUNMETAL, PN40 #631MGFO DIN 32

IMPA:757218

MTML UOM:PCE

Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, DNV, Germanischer Lloyd, Lloyds Register. Overflow and control valves made of gunmetal with spring made of spring steel with anti-rust protection with flange connections. With EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases. Set pressure: 0.5 – 10 bar. Ranges of adjustment: 0.5 – 2 bar (not DN65 and larger), 1,5 – 6 bar, 1,5 – 5,5 bar (DN100), 5,5 – 10 bar (not DN65 and larger), Available seals: EPDM, FKM. Also available in Stainless Steel : series 431.

757219 VALVE OVERFLOW GUNMETAL, PN40 #631MGFO DIN 40

IMPA:757219

MTML UOM:PCE

Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, DNV, Germanischer Lloyd, Lloyds Register. Overflow and control valves made of gunmetal with spring made of spring steel with anti-rust protection with flange connections. With EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases. Set pressure: 0.5 – 10 bar. Ranges of adjustment: 0.5 – 2 bar (not DN65 and larger), 1,5 – 6 bar, 1,5 – 5,5 bar (DN100), 5,5 – 10 bar (not DN65 and larger), Available seals: EPDM, FKM. Also available in Stainless Steel : series 431.

757220 VALVE OVERFLOW GUNMETAL, PN40 #631MGFO DIN 50

IMPA:757220

MTML UOM:PCE

Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, DNV, Germanischer Lloyd, Lloyds Register. Overflow and control valves made of gunmetal with spring made of spring steel with anti-rust protection with flange connections. With EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases. Set pressure: 0.5 – 10 bar. Ranges of adjustment: 0.5 – 2 bar (not DN65 and larger), 1,5 – 6 bar, 1,5 – 5,5 bar (DN100), 5,5 – 10 bar (not DN65 and larger), Available seals: EPDM, FKM. Also available in Stainless Steel : series 431.

757227 VALVE OVERFLOW GUNMETAL, PN16 #631MGFO DIN 65

IMPA:757227

MTML UOM:PCE

Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, DNV, Germanischer Lloyd, Lloyds Register. Overflow and control valves made of gunmetal with spring made of spring steel with anti-rust protection with flange connections. With EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases. Set pressure: 0.5 – 10 bar. Ranges of adjustment: 0.5 – 2 bar (not DN65 and larger), 1,5 – 6 bar, 1,5 – 5,5 bar (DN100), 5,5 – 10 bar (not DN65 and larger), Available seals: EPDM, FKM. Also available in Stainless Steel : series 431.

757228 VALVE OVERFLOW GUNMETAL, PN40 #631MGFO DIN 65

IMPA:757228

MTML UOM:PCE

Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, DNV, Germanischer Lloyd, Lloyds Register. Overflow and control valves made of gunmetal with spring made of spring steel with anti-rust protection with flange connections. With EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases. Set pressure: 0.5 – 10 bar. Ranges of adjustment: 0.5 – 2 bar (not DN65 and larger), 1,5 – 6 bar, 1,5 – 5,5 bar (DN100), 5,5 – 10 bar (not DN65 and larger), Available seals: EPDM, FKM. Also available in Stainless Steel : series 431.

757229 VALVE OVERFLOW GUNMETAL, PN40 #631MGFO DIN 80

IMPA:757229

MTML UOM:PCE

Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, DNV, Germanischer Lloyd, Lloyds Register. Overflow and control valves made of gunmetal with spring made of spring steel with anti-rust protection with flange connections. With EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases. Set pressure: 0.5 – 10 bar. Ranges of adjustment: 0.5 – 2 bar (not DN65 and larger), 1,5 – 6 bar, 1,5 – 5,5 bar (DN100), 5,5 – 10 bar (not DN65 and larger), Available seals: EPDM, FKM. Also available in Stainless Steel : series 431.

757230 VALVE OVERFLOW STAINLESS STEEL, PN40 #431MGFO DIN 20

IMPA:757230

MTML UOM:PCE

Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, DNV, Germanischer Lloyd, Lloyds Register. Overflow and control valves made of gunmetal with spring made of spring steel with anti-rust protection with flange connections. With EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases. Set pressure: 0.5 – 10 bar. Ranges of adjustment: 0.5 – 2 bar (not DN65 and larger), 1,5 – 6 bar, 1,5 – 5,5 bar (DN100), 5,5 – 10 bar (not DN65 and larger), Available seals: EPDM, FKM. Also available in Stainless Steel : series 431.

757237 VALVE OVERFLOW STAINLESS STEEL, PN40 #431MGFO DIN 25

IMPA:757237

MTML UOM:PCE

Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, DNV, Germanischer Lloyd, Lloyds Register. Overflow and control valves made of gunmetal with spring made of spring steel with anti-rust protection with flange connections. With EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases. Set pressure: 0.5 – 10 bar. Ranges of adjustment: 0.5 – 2 bar (not DN65 and larger), 1,5 – 6 bar, 1,5 – 5,5 bar (DN100), 5,5 – 10 bar (not DN65 and larger), Available seals: EPDM, FKM. Also available in Stainless Steel : series 431.

757238 VALVE OVERFLOW STAINLESS STEEL, PN40 #431MGFO DIN 32

IMPA:757238

MTML UOM:PCE

Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, DNV, Germanischer Lloyd, Lloyds Register. Overflow and control valves made of gunmetal with spring made of spring steel with anti-rust protection with flange connections. With EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases. Set pressure: 0.5 – 10 bar. Ranges of adjustment: 0.5 – 2 bar (not DN65 and larger), 1,5 – 6 bar, 1,5 – 5,5 bar (DN100), 5,5 – 10 bar (not DN65 and larger), Available seals: EPDM, FKM. Also available in Stainless Steel : series 431.

757239 VALVE OVERFLOW STAINLESS STEEL, PN40 #431MGFO DIN 40

IMPA:757239

MTML UOM:PCE

Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, DNV, Germanischer Lloyd, Lloyds Register. Overflow and control valves made of gunmetal with spring made of spring steel with anti-rust protection with flange connections. With EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases. Set pressure: 0.5 – 10 bar. Ranges of adjustment: 0.5 – 2 bar (not DN65 and larger), 1,5 – 6 bar, 1,5 – 5,5 bar (DN100), 5,5 – 10 bar (not DN65 and larger), Available seals: EPDM, FKM. Also available in Stainless Steel : series 431.

757240 VALVE OVERFLOW STAINLESS STEEL, PN40 #431MGFO DIN 50

IMPA:757240

MTML UOM:PCE

Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, DNV, Germanischer Lloyd, Lloyds Register. Overflow and control valves made of gunmetal with spring made of spring steel with anti-rust protection with flange connections. With EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases. Set pressure: 0.5 – 10 bar. Ranges of adjustment: 0.5 – 2 bar (not DN65 and larger), 1,5 – 6 bar, 1,5 – 5,5 bar (DN100), 5,5 – 10 bar (not DN65 and larger), Available seals: EPDM, FKM. Also available in Stainless Steel : series 431.

757253 VALVE OVERFLOW STAINLESS STEEL, PN16 #431MGFO DIN 65

IMPA:757253

MTML UOM:PCE

Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, DNV, Germanischer Lloyd, Lloyds Register. Overflow and control valves made of gunmetal with spring made of spring steel with anti-rust protection with flange connections. With EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases. Set pressure: 0.5 – 10 bar. Ranges of adjustment: 0.5 – 2 bar (not DN65 and larger), 1,5 – 6 bar, 1,5 – 5,5 bar (DN100), 5,5 – 10 bar (not DN65 and larger), Available seals: EPDM, FKM. Also available in Stainless Steel : series 431.

757254 VALVE OVERFLOW STAINLESS STEEL, PN40 #431MGFO DIN 65

IMPA:757254

MTML UOM:PCE

Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, DNV, Germanischer Lloyd, Lloyds Register. Overflow and control valves made of gunmetal with spring made of spring steel with anti-rust protection with flange connections. With EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases. Set pressure: 0.5 – 10 bar. Ranges of adjustment: 0.5 – 2 bar (not DN65 and larger), 1,5 – 6 bar, 1,5 – 5,5 bar (DN100), 5,5 – 10 bar (not DN65 and larger), Available seals: EPDM, FKM. Also available in Stainless Steel : series 431.

757255 VALVE OVERFLOW STAINLESS STEEL, PN40 #431MGFO DIN 80

IMPA:757255

MTML UOM:PCE

Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, DNV, Germanischer Lloyd, Lloyds Register. Overflow and control valves made of gunmetal with spring made of spring steel with anti-rust protection with flange connections. With EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases. Set pressure: 0.5 – 10 bar. Ranges of adjustment: 0.5 – 2 bar (not DN65 and larger), 1,5 – 6 bar, 1,5 – 5,5 bar (DN100), 5,5 – 10 bar (not DN65 and larger), Available seals: EPDM, FKM. Also available in Stainless Steel : series 431.

757300 VALVE OVERFLOW S.STEEL, PN40 #431MGFO DIN 15

IMPA:757300

MTML UOM:PCE

Marine Type Approvals held for these valves: American Bureau of Shipping, Bureau Veritas, DNV, Germanischer Lloyd, Lloyds Register. Overflow and control valves made of gunmetal with spring made of spring steel with anti-rust protection with flange connections. With EPDM (ethylene propylene diene monomer rubber) seal suitable for water, neutral and non-sticking liquids, compressed air and neutral gases. Set pressure: 0.5 – 10 bar. Ranges of adjustment: 0.5 – 2 bar (not DN65 and larger), 1,5 – 6 bar, 1,5 – 5,5 bar (DN100), 5,5 – 10 bar (not DN65 and larger), Available seals: EPDM, FKM. Also available in Stainless Steel : series 431.