Heli-Serts
693801 HELI-SERT WITH FURTHER DETAIL
IMPA:693801
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693811 HELI-SERT STAINLESS STEEL, COARSE M2 X 0.4 X 2MM
IMPA:693811
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693812 HELI-SERT STAINLESS STEEL, COARSE M2 X 0.4 X 3MM
IMPA:693812
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693813 HELI-SERT STAINLESS STEEL, COARSE M2 X 0.4 X 4MM
IMPA:693813
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693814 HELI-SERT STAINLESS STEEL, COARSE M2 X 0.4 X 5MM
IMPA:693814
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693815 HELI-SERT STAINLESS STEEL, COARSE M2 X 0.4 X 6MM
IMPA:693815
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693816 HELI-SERT STAINLESS STEEL, COARSE M2.5 X 0.45 X 2.5MM
IMPA:693816
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693817 HELI-SERT STAINLESS STEEL, COARSE M2.5 X 0.45 X 4MM
IMPA:693817
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693818 HELI-SERT STAINLESS STEEL, COARSE M2.5 X 0.45 X 5MM
IMPA:693818
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693819 HELI-SERT STAINLESS STEEL, COARSE M2.5 X 0.45 X 6MM
IMPA:693819
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693820 HELI-SERT STAINLESS STEEL, COARSE M2.5 X 0.45 X 7.5MM
IMPA:693820
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693821 HELI-SERT STAINLESS STEEL, COARSE M3 X 0.5 X 3MM
IMPA:693821
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693822 HELI-SERT STAINLESS STEEL, COARSE M3 X 0.5 X 4.5MM
IMPA:693822
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693823 HELI-SERT STAINLESS STEEL, COARSE M3 X 0.5 X 6MM
IMPA:693823
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693824 HELI-SERT STAINLESS STEEL, COARSE M3 X 0.5 X 7.5MM
IMPA:693824
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693825 HELI-SERT STAINLESS STEEL, COARSE M3 X 0.5 X 9MM
IMPA:693825
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693826 HELI-SERT STAINLESS STEEL, COARSE M3.5 X 0.6 X 3.5MM
IMPA:693826
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693827 HELI-SERT STAINLESS STEEL, COARSE M3.5 X 0.6 X 5MM
IMPA:693827
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693828 HELI-SERT STAINLESS STEEL, COARSE M3.5 X 0.6 X 7MM
IMPA:693828
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693829 HELI-SERT STAINLESS STEEL, COARSE M3.5 X 0.6 X 9MM
IMPA:693829
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693830 HELI-SERT STAINLESS STEEL, COARSE M3.5 X 0.6 X 10.5MM
IMPA:693830
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693831 HELI-SERT STAINLESS STEEL, COARSE M4 X 0.7 X 4MM
IMPA:693831
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693832 HELI-SERT STAINLESS STEEL, COARSE M4 X 0.7 X 6MM
IMPA:693832
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693833 HELI-SERT STAINLESS STEEL, COARSE M4 X 0.7 X 8MM
IMPA:693833
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693834 HELI-SERT STAINLESS STEEL, COARSE M4 X 0.7 X 10MM
IMPA:693834
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693835 HELI-SERT STAINLESS STEEL, COARSE M4 X 0.7 X 12MM
IMPA:693835
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693836 HELI-SERT STAINLESS STEEL, COARSE M5 X 0.8 X 5MM
IMPA:693836
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693837 HELI-SERT STAINLESS STEEL, COARSE M5 X 0.8 X 7.5MM
IMPA:693837
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693838 HELI-SERT STAINLESS STEEL, COARSE M5 X 0.8 X 10MM
IMPA:693838
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693839 HELI-SERT STAINLESS STEEL, COARSE M5 X 0.8 X 12.5MM
IMPA:693839
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693840 HELI-SERT STAINLESS STEEL, COARSE M5 X 0.8 X 15MM
IMPA:693840
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693841 HELI-SERT STAINLESS STEEL, COARSE M6 X 1.0 X 6MM
IMPA:693841
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693842 HELI-SERT STAINLESS STEEL, COARSE M6 X 1.0 X 9MM
IMPA:693842
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693843 HELI-SERT STAINLESS STEEL, COARSE M6 X 1.0 X 12MM
IMPA:693843
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693844 HELI-SERT STAINLESS STEEL, COARSE M6 X 1.0 X 15MM
IMPA:693844
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693845 HELI-SERT STAINLESS STEEL, COARSE M6 X 1.0 X 18MM
IMPA:693845
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693846 HELI-SERT STAINLESS STEEL, COARSE M7 X 1.0 X 7MM
IMPA:693846
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693847 HELI-SERT STAINLESS STEEL, COARSE M7 X 1.0 X 10.5MM
IMPA:693847
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693848 HELI-SERT STAINLESS STEEL, COARSE M7 X 1.0 X 14MM
IMPA:693848
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693849 HELI-SERT STAINLESS STEEL, COARSE M7 X 1.0 X 17.5MM
IMPA:693849
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693850 HELI-SERT STAINLESS STEEL, COARSE M7 X 1.0 X 21MM
IMPA:693850
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693851 HELI-SERT STAINLESS STEEL, COARSE M8 X 1.25 X 8MM
IMPA:693851
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693852 HELI-SERT STAINLESS STEEL, COARSE M8 X 1.25 X 12MM
IMPA:693852
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693853 HELI-SERT STAINLESS STEEL, COARSE M8 X 1.25 X 16MM
IMPA:693853
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693854 HELI-SERT STAINLESS STEEL, COARSE M8 X 1.25 X 20MM
IMPA:693854
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693855 HELI-SERT STAINLESS STEEL, COARSE M8 X 1.25 X 24MM
IMPA:693855
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693856 HELI-SERT STAINLESS STEEL, COARSE M10 X 1.5 X 10MM
IMPA:693856
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693857 HELI-SERT STAINLESS STEEL, COARSE M10 X 1.5 X 15MM
IMPA:693857
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693858 HELI-SERT STAINLESS STEEL, COARSE M10 X 1.5 X 20MM
IMPA:693858
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693859 HELI-SERT STAINLESS STEEL, COARSE M10 X 1.5 X 25MM
IMPA:693859
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693860 HELI-SERT STAINLESS STEEL, COARSE M10 X 1.5 X 30MM
IMPA:693860
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693861 HELI-SERT STAINLESS STEEL, COARSE M12 X 1.75 X 12MM
IMPA:693861
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693862 HELI-SERT STAINLESS STEEL, COARSE M12 X 1.75 X 18MM
IMPA:693862
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693863 HELI-SERT STAINLESS STEEL, COARSE M12 X 1.75 X 24MM
IMPA:693863
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693864 HELI-SERT STAINLESS STEEL, COARSE M12 X 1.75 X 30MM
IMPA:693864
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693865 HELI-SERT STAINLESS STEEL, COARSE M12 X 1.75 X 36MM
IMPA:693865
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693866 HELI-SERT STAINLESS STEEL, COARSE M14 X 2.0 X 14MM
IMPA:693866
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693867 HELI-SERT STAINLESS STEEL, COARSE M14 X 2.0 X 21MM
IMPA:693867
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693868 HELI-SERT STAINLESS STEEL, COARSE M14 X 2.0 X 28MM
IMPA:693868
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693869 HELI-SERT STAINLESS STEEL, COARSE M14 X 2.0 X 35MM
IMPA:693869
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693870 HELI-SERT STAINLESS STEEL, COARSE M14 X 2.0 X 42MM
IMPA:693870
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693871 HELI-SERT STAINLESS STEEL, COARSE M16 X 2.0 X 16MM
IMPA:693871
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693872 HELI-SERT STAINLESS STEEL, COARSE M16 X 2.0 X 24MM
IMPA:693872
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693873 HELI-SERT STAINLESS STEEL, COARSE M16 X 2.0 X 32MM
IMPA:693873
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693874 HELI-SERT STAINLESS STEEL, COARSE M16 X 2.0 X 40MM
IMPA:693874
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693875 HELI-SERT STAINLESS STEEL, COARSE M16 X 2.0 X 48MM
IMPA:693875
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693876 HELI-SERT STAINLESS STEEL, COARSE M18 X 2.5 X 18MM
IMPA:693876
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693877 HELI-SERT STAINLESS STEEL, COARSE M18 X 2.5 X 27MM
IMPA:693877
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693878 HELI-SERT STAINLESS STEEL, COARSE M18 X 2.5 X 36MM
IMPA:693878
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693879 HELI-SERT STAINLESS STEEL, COARSE M18 X 2.5 X 45MM
IMPA:693879
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693880 HELI-SERT STAINLESS STEEL, COARSE M18 X 2.5 X 54MM
IMPA:693880
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693881 HELI-SERT STAINLESS STEEL, COARSE M20 X 2.5 X 20MM
IMPA:693881
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693882 HELI-SERT STAINLESS STEEL, COARSE M20 X 2.5 X 30MM
IMPA:693882
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693883 HELI-SERT STAINLESS STEEL, COARSE M20 X 2.5 X 40MM
IMPA:693883
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693884 HELI-SERT STAINLESS STEEL, COARSE M20 X 2.5 X 50MM
IMPA:693884
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693885 HELI-SERT STAINLESS STEEL, COARSE M20 X 2.5 X 60MM
IMPA:693885
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693886 HELI-SERT STAINLESS STEEL, COARSE M22 X 2.5 X 22MM
IMPA:693886
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693887 HELI-SERT STAINLESS STEEL, COARSE M22 X 2.5 X 33MM
IMPA:693887
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693888 HELI-SERT STAINLESS STEEL, COARSE M22 X 2.5 X 44MM
IMPA:693888
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693889 HELI-SERT STAINLESS STEEL, COARSE M22 X 2.5 X 55MM
IMPA:693889
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693890 HELI-SERT STAINLESS STEEL, COARSE M22 X 2.5 X 66MM
IMPA:693890
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693891 HELI-SERT STAINLESS STEEL, COARSE M24 X 3.0 X 24MM
IMPA:693891
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693892 HELI-SERT STAINLESS STEEL, COARSE M24 X 3.0 X 36MM
IMPA:693892
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693893 HELI-SERT STAINLESS STEEL, COARSE M24 X 3.0 X 48MM
IMPA:693893
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693894 HELI-SERT STAINLESS STEEL, COARSE M24 X 3.0 X 60MM
IMPA:693894
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693895 HELI-SERT STAINLESS STEEL, COARSE M24 X 3.0 X 72MM
IMPA:693895
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693896 HELI-SERT STAINLESS STEEL, COARSE M27 X 3.0 X 40MM
IMPA:693896
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693897 HELI-SERT STAINLESS STEEL, COARSE M30 X 3.5 X 45MM
IMPA:693897
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693898 HELI-SERT STAINLESS STEEL, COARSE M33 X 3.5 X 49MM
IMPA:693898
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
693899 HELI-SERT STAINLESS STEEL, COARSE M36 X 4.0 X 54MM
IMPA:693899
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
695311 HELI-SERT STAINLESS STEEL, FINE M8 X 1.0 X 8MM
IMPA:695311
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
695312 HELI-SERT STAINLESS STEEL, FINE M8 X 1.0 X 12MM
IMPA:695312
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
695313 HELI-SERT STAINLESS STEEL, FINE M8 X 1.0 X 16MM
IMPA:695313
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
695314 HELI-SERT STAINLESS STEEL, FINE M8 X 1.0 X 20MM
IMPA:695314
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
695315 HELI-SERT STAINLESS STEEL, FINE M8 X 1.0 X 24MM
IMPA:695315
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
695316 HELI-SERT STAINLESS STEEL, FINE M10 X 1.0 X 10MM
IMPA:695316
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
695317 HELI-SERT STAINLESS STEEL, FINE M10 X 1.0 X 15MM
IMPA:695317
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
695318 HELI-SERT STAINLESS STEEL, FINE M10 X 1.0 X 20MM
IMPA:695318
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
695319 HELI-SERT STAINLESS STEEL, FINE M10 X 1.0 X 25MM
IMPA:695319
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
695320 HELI-SERT STAINLESS STEEL, FINE M10 X 1.0 X 30MM
IMPA:695320
MTML UOM:PCE
Made of stainless steel or bronze. Instead of building up a thread hole by welding worn out threads or using bushes for rethreading, you just have to clean the hole with a tap and insert these heli-serts. Tightening procedure is the same as with the original thread. The proper length of the heli-sert should usually be 1 – 2 times the length of the standard bolts being used. Kind of thread: Nominal size, Metric coarse M2.2-M36, Metric Fine M8-M30, Whitworth Coarse W1/4-W1-1/2, Unify Coarse U No.2-U1-1/2, Unify Fine U No.6-U1-1/2, Parallel pipe thread 3/8 3/4
© 2025 ShipServ Limited