Temperature Calibrators

652507 CALIBRATOR TEMP SIKA TP17 165M, RANGE -35 - 165DEG.C 90-240VAC

IMPA:652507

MTML UOM:SET

Exact temperature measurement and monitoring are “musts” in applications crucial to operational safety of machinery and industrial installations. In 2002, this was applied to all ships by the Safety of Life at Sea (SOLAS), Chapter IX and the ISM (the International Safety Management) Code as mandatory regulation. Regular inspection of the temperature sensors used in these applications is essential for economic and technical safety reasons and is already prescribed as obligatory in many sectors. This calibrator contains an electrically controlled metal block with a bore for the insertion of the test piece. Adaptor sleeves are used for test pieces with smaller diameter. The block is mounted in a heat insulated housing. The complete electronic is located in the front of the calibrator. The required temperature is easily set on the digital controller. The current temperature will automatically be adjusted to the set value. The current temperature and set temperature are constantly shown on the 2-line, 4-digit, 7-segment LED display.

652508 CALIBRATOR TEMP SIKA TP17 650M, RANGE UPTO 650DEG.C 115VAC

IMPA:652508

MTML UOM:SET

Exact temperature measurement and monitoring are “musts” in applications crucial to operational safety of machinery and industrial installations. In 2002, this was applied to all ships by the Safety of Life at Sea (SOLAS), Chapter IX and the ISM (the International Safety Management) Code as mandatory regulation. Regular inspection of the temperature sensors used in these applications is essential for economic and technical safety reasons and is already prescribed as obligatory in many sectors. This calibrator contains an electrically controlled metal block with a bore for the insertion of the test piece. Adaptor sleeves are used for test pieces with smaller diameter. The block is mounted in a heat insulated housing. The complete electronic is located in the front of the calibrator. The required temperature is easily set on the digital controller. The current temperature will automatically be adjusted to the set value. The current temperature and set temperature are constantly shown on the 2-line, 4-digit, 7-segment LED display.

652509 CALIBRATOR TEMP SIKA TP17 650M, RANGE UPTO 650DEG.C 230VAC

IMPA:652509

MTML UOM:SET

Exact temperature measurement and monitoring are “musts” in applications crucial to operational safety of machinery and industrial installations. In 2002, this was applied to all ships by the Safety of Life at Sea (SOLAS), Chapter IX and the ISM (the International Safety Management) Code as mandatory regulation. Regular inspection of the temperature sensors used in these applications is essential for economic and technical safety reasons and is already prescribed as obligatory in many sectors. This calibrator contains an electrically controlled metal block with a bore for the insertion of the test piece. Adaptor sleeves are used for test pieces with smaller diameter. The block is mounted in a heat insulated housing. The complete electronic is located in the front of the calibrator. The required temperature is easily set on the digital controller. The current temperature will automatically be adjusted to the set value. The current temperature and set temperature are constantly shown on the 2-line, 4-digit, 7-segment LED display.

652511 TEMPERATURE CALIBRATOR, 600DEG.C 115/220VOLT TC600M

IMPA:652511

MTML UOM:SET

Supplied in a robust carrying case with low weight and compact design make the calibrators ideal for “on site” calibration. The calibrators will fulfill requirements in connection with quality assurance program as well as requirements from classification societies. *Temperature Calibration: The metal block principle excludes the use of oil or other liquids. Interchangeable insertion tubes with various diameters ensure thermal contact to the sensor being tested. Simply place the sensor to be calibrated in the calibrator. Set the temperature. From the dual line display both true and set temperature can be read. When stabilisation occurs simply read the true temperature from the calibrator and recalibrate the sensor or system accordingly.

652514 CALIBRATOR TEMP SIKA TP17 200, RANGE -55 UPTO 200DEG.C

IMPA:652514

MTML UOM:SET

Exact temperature measurement and monitoring are “musts” in applications crucial to operational safety of machinery and industrial installations. In 2002, this was applied to all ships by the Safety of Life at Sea (SOLAS), Chapter IX and the ISM (the International Safety Management) Code as mandatory regulation. Regular inspection of the temperature sensors used in these applications is essential for economic and technical safety reasons and is already prescribed as obligatory in many sectors. This calibrator contains an electrically controlled metal block with a bore for the insertion of the test piece. Adaptor sleeves are used for test pieces with smaller diameter. The block is mounted in a heat insulated housing. The complete electronic is located in the front of the calibrator. The required temperature is easily set on the digital controller. The current temperature will automatically be adjusted to the set value. The current temperature and set temperature are constantly shown on the 2-line, 4-digit, 7-segment LED display.