Try Squares Precision
650966 TRY SQUARE PRECISION WITH BASE, 1ST-GRADE(+_0.013) 50X40MM
IMPA:650966
MTML UOM:PCE
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade
650967 TRY SQUARE PRECISION WITH BASE, 1ST-GRADE(+_0.014) 75X50MM
IMPA:650967
MTML UOM:PCE
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade
650968 TRY SQUARE PRECISION WITH BASE, 1ST-GRADE(+_0.015) 100X70MM
IMPA:650968
MTML UOM:PCE
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade
650969 TRY SQUARE PRECISION WITH BASE, 1ST-GRADE(+_0.016) 125X80MM
IMPA:650969
MTML UOM:PCE
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade
650970 TRY SQUARE PRECISION WITH BASE, 1ST-GRADE(+_0.018) 150X100MM
IMPA:650970
MTML UOM:PCE
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade
650971 TRY SQUARE PRECISION WITH BASE, 1ST-GRADE(+_0.02) 200X130MM
IMPA:650971
MTML UOM:PCE
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade
650972 TRY SQUARE PRECISION WITH BASE, 1ST-GRADE(+_0.022) 250X165MM
IMPA:650972
MTML UOM:PCE
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade
650973 TRY SQUARE PRECISION WITH BASE, 1ST-GRADE(+_0.025) 300X200MM
IMPA:650973
MTML UOM:PCE
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade
650974 TRY SQUARE PRECISION WITH BASE, 1ST-GRADE(+_0.03) 400X200MM
IMPA:650974
MTML UOM:PCE
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade
650975 TRY SQUARE PRECISION WITH BASE, 1ST-GRADE(+_0.035) 500X300MM
IMPA:650975
MTML UOM:PCE
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade
650976 TRY SQUARE PRECISION WITH BASE, 1ST-GRADE(+_0.04) 600X350MM
IMPA:650976
MTML UOM:PCE
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade
650977 TRY SQUARE PRECISION WITH BASE, 1ST-GRADE(+_0.048) 750X400MM
IMPA:650977
MTML UOM:PCE
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade
650978 TRY SQUARE PRECISION WITH BASE, 1ST-GRADE(+_0.06) 1000X550MM
IMPA:650978
MTML UOM:PCE
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade
650981 TRY SQUARE PRECISION WITH BASE, 2ND-GRADE(+_0.02) 50X40MM
IMPA:650981
MTML UOM:PCE
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 2nd Grade.
650982 TRY SQUARE PRECISION WITH BASE, 2ND-GRADE(+_0.027) 75X50MM
IMPA:650982
MTML UOM:PCE
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 2nd Grade.
650983 TRY SQUARE PRECISION WITH BASE, 2ND-GRADE(+_0.03) 100X70MM
IMPA:650983
MTML UOM:PCE
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 2nd Grade.
650984 TRY SQUARE PRECISION WITH BASE, 2ND-GRADE(+_0.032) 125X80MM
IMPA:650984
MTML UOM:PCE
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 2nd Grade.
650985 TRY SQUARE PRECISION WITH BASE, 2ND-GRADE(+_0.035) 150X100MM
IMPA:650985
MTML UOM:PCE
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 2nd Grade.
650986 TRY SQUARE PRECISION WITH BASE, 2ND-GRADE(+_0.04) 200X130MM
IMPA:650986
MTML UOM:PCE
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 2nd Grade.
650987 TRY SQUARE PRECISION WITH BASE, 2ND-GRADE(+_0.045) 250X165MM
IMPA:650987
MTML UOM:PCE
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 2nd Grade.
650988 TRY SQUARE PRECISION WITH BASE, 2ND-GRADE(+_0.05) 300X200MM
IMPA:650988
MTML UOM:PCE
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 2nd Grade.
650989 TRY SQUARE PRECISION WITH BASE, 2ND-GRADE(+_0.06) 400X200MM
IMPA:650989
MTML UOM:PCE
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 2nd Grade.
650990 TRY SQUARE PRECISION WITH BASE, 2ND-GRADE(+_0.07) 500X300MM
IMPA:650990
MTML UOM:PCE
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 2nd Grade.
650991 TRY SQUARE PRECISION WITH BASE, 2ND-GRADE(+_0.08) 600X350MM
IMPA:650991
MTML UOM:PCE
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 2nd Grade.
650992 TRY SQUARE PRECISION WITH BASE, 2ND-GRADE(+_0.096) 750X400MM
IMPA:650992
MTML UOM:PCE
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 2nd Grade.
650993 TRY SQUARE PRECISION WITH BASE, 2ND-GRADE(+_0.12) 1000X550MM
IMPA:650993
MTML UOM:PCE
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 2nd Grade.
© 2025 ShipServ Limited