Taper Pin Reamers Hand 1/48

630861 REAMER TAPER PIN AMERICAN, STANDARD STRAIGHT FLUTE #0000

IMPA:630861

MTML UOM:PCE

1/48 Taper pins according to U.S. Standard have a taper of 6.35 mm per 25.4 mm. These reamers are designed in nominal numbers but since the standards are not unified, there are minor differences in tip diameter and small end diameter.

630862 REAMER TAPER PIN AMERICAN, STANDARD STRAIGHT FLUTE #000

IMPA:630862

MTML UOM:PCE

1/48 Taper pins according to U.S. Standard have a taper of 6.35 mm per 25.4 mm. These reamers are designed in nominal numbers but since the standards are not unified, there are minor differences in tip diameter and small end diameter.

630863 REAMER TAPER PIN AMERICAN, STANDARD STRAIGHT FLUTE #00

IMPA:630863

MTML UOM:PCE

1/48 Taper pins according to U.S. Standard have a taper of 6.35 mm per 25.4 mm. These reamers are designed in nominal numbers but since the standards are not unified, there are minor differences in tip diameter and small end diameter.

630864 REAMER TAPER PIN AMERICAN, STANDARD STRAIGHT FLUTE #0

IMPA:630864

MTML UOM:PCE

1/48 Taper pins according to U.S. Standard have a taper of 6.35 mm per 25.4 mm. These reamers are designed in nominal numbers but since the standards are not unified, there are minor differences in tip diameter and small end diameter.

630865 REAMER TAPER PIN AMERICAN, STANDARD STRAIGHT FLUTE #1

IMPA:630865

MTML UOM:PCE

1/48 Taper pins according to U.S. Standard have a taper of 6.35 mm per 25.4 mm. These reamers are designed in nominal numbers but since the standards are not unified, there are minor differences in tip diameter and small end diameter.

630866 REAMER TAPER PIN AMERICAN, STANDARD STRAIGHT FLUTE #2

IMPA:630866

MTML UOM:PCE

1/48 Taper pins according to U.S. Standard have a taper of 6.35 mm per 25.4 mm. These reamers are designed in nominal numbers but since the standards are not unified, there are minor differences in tip diameter and small end diameter.

630867 REAMER TAPER PIN AMERICAN, STANDARD STRAIGHT FLUTE #3

IMPA:630867

MTML UOM:PCE

1/48 Taper pins according to U.S. Standard have a taper of 6.35 mm per 25.4 mm. These reamers are designed in nominal numbers but since the standards are not unified, there are minor differences in tip diameter and small end diameter.

630868 REAMER TAPER PIN AMERICAN, STANDARD STRAIGHT FLUTE #4

IMPA:630868

MTML UOM:PCE

1/48 Taper pins according to U.S. Standard have a taper of 6.35 mm per 25.4 mm. These reamers are designed in nominal numbers but since the standards are not unified, there are minor differences in tip diameter and small end diameter.

630869 REAMER TAPER PIN AMERICAN, STANDARD STRAIGHT FLUTE #5

IMPA:630869

MTML UOM:PCE

1/48 Taper pins according to U.S. Standard have a taper of 6.35 mm per 25.4 mm. These reamers are designed in nominal numbers but since the standards are not unified, there are minor differences in tip diameter and small end diameter.

630870 REAMER TAPER PIN AMERICAN, STANDARD STRAIGHT FLUTE #6

IMPA:630870

MTML UOM:PCE

1/48 Taper pins according to U.S. Standard have a taper of 6.35 mm per 25.4 mm. These reamers are designed in nominal numbers but since the standards are not unified, there are minor differences in tip diameter and small end diameter.

630871 REAMER TAPER PIN AMERICAN, STANDARD STRAIGHT FLUTE #7

IMPA:630871

MTML UOM:PCE

1/48 Taper pins according to U.S. Standard have a taper of 6.35 mm per 25.4 mm. These reamers are designed in nominal numbers but since the standards are not unified, there are minor differences in tip diameter and small end diameter.

630872 REAMER TAPER PIN AMERICAN, STANDARD STRAIGHT FLUTE #8

IMPA:630872

MTML UOM:PCE

1/48 Taper pins according to U.S. Standard have a taper of 6.35 mm per 25.4 mm. These reamers are designed in nominal numbers but since the standards are not unified, there are minor differences in tip diameter and small end diameter.

630873 REAMER TAPER PIN AMERICAN, STANDARD STRAIGHT FLUTE #9

IMPA:630873

MTML UOM:PCE

1/48 Taper pins according to U.S. Standard have a taper of 6.35 mm per 25.4 mm. These reamers are designed in nominal numbers but since the standards are not unified, there are minor differences in tip diameter and small end diameter.

630874 REAMER TAPER PIN AMERICAN, STANDARD STRAIGHT FLUTE #10

IMPA:630874

MTML UOM:PCE

1/48 Taper pins according to U.S. Standard have a taper of 6.35 mm per 25.4 mm. These reamers are designed in nominal numbers but since the standards are not unified, there are minor differences in tip diameter and small end diameter.

630875 REAMER TAPER PIN AMERICAN, STANDARD STRAIGHT FLUTE #11

IMPA:630875

MTML UOM:PCE

1/48 Taper pins according to U.S. Standard have a taper of 6.35 mm per 25.4 mm. These reamers are designed in nominal numbers but since the standards are not unified, there are minor differences in tip diameter and small end diameter.

630876 REAMER TAPER PIN AMERICAN, STANDARD TRAIGHT FLUTE #12

IMPA:630876

MTML UOM:PCE

1/48 Taper pins according to U.S. Standard have a taper of 6.35 mm per 25.4 mm. These reamers are designed in nominal numbers but since the standards are not unified, there are minor differences in tip diameter and small end diameter.

630877 REAMER TAPER PIN AMERICAN, STANDARD STRAIGHT FLUTE #13

IMPA:630877

MTML UOM:PCE

1/48 Taper pins according to U.S. Standard have a taper of 6.35 mm per 25.4 mm. These reamers are designed in nominal numbers but since the standards are not unified, there are minor differences in tip diameter and small end diameter.

630878 REAMER TAPER PIN AMERICAN, STANDARD STRAIGHT FLUTE #14

IMPA:630878

MTML UOM:PCE

1/48 Taper pins according to U.S. Standard have a taper of 6.35 mm per 25.4 mm. These reamers are designed in nominal numbers but since the standards are not unified, there are minor differences in tip diameter and small end diameter.