Blind Rivets for Riveter

615236 RIVET BLIND OPENTYPE ALUM-BODY, STEEL-MANDREL 2.4X5.7MM 100'S

IMPA:615236

MTML UOM:PA

High strength, precision-made hollow rivets assembled on a solid mandrel. They are specially useful for “blind” fastening where no access to the reverse side is available. Rivets are made in various sizes with head styles in aluminium, steel, monel, copper and stainless steel. Two types of standard rivets, open and closed, are available but the most common open type is described below. Standard Open Type: Standard open type rivet is a hollow rivet, pre-assembled on to a headed pin or mandrel. The mandrel is designed to fracture at a pre-determined point during the setting operation, when the lamination forming the structure being fastened, have been drawn closely together and the whole join is tight. Normally on the vessel the rivet of aluminium alloy body and steel mandrel are used. Unless otherwise specified the aluminium alloy body and steel mandrel type will be supplied. Please specify diameter and length in mm when ordering.

615237 RIVET BLIND OPENTYPE ALUM-BODY, STEEL-MANDREL 3.2X4.4MM 60'S

IMPA:615237

MTML UOM:PA

High strength, precision-made hollow rivets assembled on a solid mandrel. They are specially useful for “blind” fastening where no access to the reverse side is available. Rivets are made in various sizes with head styles in aluminium, steel, monel, copper and stainless steel. Two types of standard rivets, open and closed, are available but the most common open type is described below. Standard Open Type: Standard open type rivet is a hollow rivet, pre-assembled on to a headed pin or mandrel. The mandrel is designed to fracture at a pre-determined point during the setting operation, when the lamination forming the structure being fastened, have been drawn closely together and the whole join is tight. Normally on the vessel the rivet of aluminium alloy body and steel mandrel are used. Unless otherwise specified the aluminium alloy body and steel mandrel type will be supplied. Please specify diameter and length in mm when ordering.

615238 RIVET BLIND OPENTYPE ALUM-BODY, STEEL-MANDREL 3.2X6.3MM 60'S

IMPA:615238

MTML UOM:PA

High strength, precision-made hollow rivets assembled on a solid mandrel. They are specially useful for “blind” fastening where no access to the reverse side is available. Rivets are made in various sizes with head styles in aluminium, steel, monel, copper and stainless steel. Two types of standard rivets, open and closed, are available but the most common open type is described below. Standard Open Type: Standard open type rivet is a hollow rivet, pre-assembled on to a headed pin or mandrel. The mandrel is designed to fracture at a pre-determined point during the setting operation, when the lamination forming the structure being fastened, have been drawn closely together and the whole join is tight. Normally on the vessel the rivet of aluminium alloy body and steel mandrel are used. Unless otherwise specified the aluminium alloy body and steel mandrel type will be supplied. Please specify diameter and length in mm when ordering.

615239 RIVET BLIND OPENTYPE ALUM-BODY, STEEL-MANDREL 3.2X8.0MM 60'S

IMPA:615239

MTML UOM:PA

High strength, precision-made hollow rivets assembled on a solid mandrel. They are specially useful for “blind” fastening where no access to the reverse side is available. Rivets are made in various sizes with head styles in aluminium, steel, monel, copper and stainless steel. Two types of standard rivets, open and closed, are available but the most common open type is described below. Standard Open Type: Standard open type rivet is a hollow rivet, pre-assembled on to a headed pin or mandrel. The mandrel is designed to fracture at a pre-determined point during the setting operation, when the lamination forming the structure being fastened, have been drawn closely together and the whole join is tight. Normally on the vessel the rivet of aluminium alloy body and steel mandrel are used. Unless otherwise specified the aluminium alloy body and steel mandrel type will be supplied. Please specify diameter and length in mm when ordering.

615240 RIVET BLIND OPENTYPE ALUM-BODY, STEEL-MANDREL 3.2X9.8MM 60'S

IMPA:615240

MTML UOM:PA

High strength, precision-made hollow rivets assembled on a solid mandrel. They are specially useful for “blind” fastening where no access to the reverse side is available. Rivets are made in various sizes with head styles in aluminium, steel, monel, copper and stainless steel. Two types of standard rivets, open and closed, are available but the most common open type is described below. Standard Open Type: Standard open type rivet is a hollow rivet, pre-assembled on to a headed pin or mandrel. The mandrel is designed to fracture at a pre-determined point during the setting operation, when the lamination forming the structure being fastened, have been drawn closely together and the whole join is tight. Normally on the vessel the rivet of aluminium alloy body and steel mandrel are used. Unless otherwise specified the aluminium alloy body and steel mandrel type will be supplied. Please specify diameter and length in mm when ordering.

615241 RIVET BLIND OPENTYPE ALUM-BODY, STEEL-MANDREL 4.0X6.9MM 50'S

IMPA:615241

MTML UOM:PA

High strength, precision-made hollow rivets assembled on a solid mandrel. They are specially useful for “blind” fastening where no access to the reverse side is available. Rivets are made in various sizes with head styles in aluminium, steel, monel, copper and stainless steel. Two types of standard rivets, open and closed, are available but the most common open type is described below. Standard Open Type: Standard open type rivet is a hollow rivet, pre-assembled on to a headed pin or mandrel. The mandrel is designed to fracture at a pre-determined point during the setting operation, when the lamination forming the structure being fastened, have been drawn closely together and the whole join is tight. Normally on the vessel the rivet of aluminium alloy body and steel mandrel are used. Unless otherwise specified the aluminium alloy body and steel mandrel type will be supplied. Please specify diameter and length in mm when ordering.

615242 RIVET BLIND OPENTYPE ALUM-BODY, STEEL-MANDREL 4.0X8.6MM 50'S

IMPA:615242

MTML UOM:PA

High strength, precision-made hollow rivets assembled on a solid mandrel. They are specially useful for “blind” fastening where no access to the reverse side is available. Rivets are made in various sizes with head styles in aluminium, steel, monel, copper and stainless steel. Two types of standard rivets, open and closed, are available but the most common open type is described below. Standard Open Type: Standard open type rivet is a hollow rivet, pre-assembled on to a headed pin or mandrel. The mandrel is designed to fracture at a pre-determined point during the setting operation, when the lamination forming the structure being fastened, have been drawn closely together and the whole join is tight. Normally on the vessel the rivet of aluminium alloy body and steel mandrel are used. Unless otherwise specified the aluminium alloy body and steel mandrel type will be supplied. Please specify diameter and length in mm when ordering.

615243 RIVET BLIND OPENTYPE ALUM-BODY, STEEL-MANDREL 4.0X10.4MM 50'S

IMPA:615243

MTML UOM:PA

High strength, precision-made hollow rivets assembled on a solid mandrel. They are specially useful for “blind” fastening where no access to the reverse side is available. Rivets are made in various sizes with head styles in aluminium, steel, monel, copper and stainless steel. Two types of standard rivets, open and closed, are available but the most common open type is described below. Standard Open Type: Standard open type rivet is a hollow rivet, pre-assembled on to a headed pin or mandrel. The mandrel is designed to fracture at a pre-determined point during the setting operation, when the lamination forming the structure being fastened, have been drawn closely together and the whole join is tight. Normally on the vessel the rivet of aluminium alloy body and steel mandrel are used. Unless otherwise specified the aluminium alloy body and steel mandrel type will be supplied. Please specify diameter and length in mm when ordering.

615244 RIVET BLIND OPENTYPE ALUM-BODY, STEEL-MANDREL 4.0X14.0MM 50'S

IMPA:615244

MTML UOM:PA

High strength, precision-made hollow rivets assembled on a solid mandrel. They are specially useful for “blind” fastening where no access to the reverse side is available. Rivets are made in various sizes with head styles in aluminium, steel, monel, copper and stainless steel. Two types of standard rivets, open and closed, are available but the most common open type is described below. Standard Open Type: Standard open type rivet is a hollow rivet, pre-assembled on to a headed pin or mandrel. The mandrel is designed to fracture at a pre-determined point during the setting operation, when the lamination forming the structure being fastened, have been drawn closely together and the whole join is tight. Normally on the vessel the rivet of aluminium alloy body and steel mandrel are used. Unless otherwise specified the aluminium alloy body and steel mandrel type will be supplied. Please specify diameter and length in mm when ordering.

615245 RIVET BLIND OPENTYPE ALUM-BODY, STEEL-MANDREL 4.8X7.5MM 40'S

IMPA:615245

MTML UOM:PA

High strength, precision-made hollow rivets assembled on a solid mandrel. They are specially useful for “blind” fastening where no access to the reverse side is available. Rivets are made in various sizes with head styles in aluminium, steel, monel, copper and stainless steel. Two types of standard rivets, open and closed, are available but the most common open type is described below. Standard Open Type: Standard open type rivet is a hollow rivet, pre-assembled on to a headed pin or mandrel. The mandrel is designed to fracture at a pre-determined point during the setting operation, when the lamination forming the structure being fastened, have been drawn closely together and the whole join is tight. Normally on the vessel the rivet of aluminium alloy body and steel mandrel are used. Unless otherwise specified the aluminium alloy body and steel mandrel type will be supplied. Please specify diameter and length in mm when ordering.

615246 RIVET BLIND OPENTYPE ALUM-BODY, STEEL-MANDREL 4.8X9.3MM 40'S

IMPA:615246

MTML UOM:PA

High strength, precision-made hollow rivets assembled on a solid mandrel. They are specially useful for “blind” fastening where no access to the reverse side is available. Rivets are made in various sizes with head styles in aluminium, steel, monel, copper and stainless steel. Two types of standard rivets, open and closed, are available but the most common open type is described below. Standard Open Type: Standard open type rivet is a hollow rivet, pre-assembled on to a headed pin or mandrel. The mandrel is designed to fracture at a pre-determined point during the setting operation, when the lamination forming the structure being fastened, have been drawn closely together and the whole join is tight. Normally on the vessel the rivet of aluminium alloy body and steel mandrel are used. Unless otherwise specified the aluminium alloy body and steel mandrel type will be supplied. Please specify diameter and length in mm when ordering.

615247 RIVET BLIND OPENTYPE ALUM-BODY, STEEL-MANDREL 4.8X11.1MM 40'S

IMPA:615247

MTML UOM:PA

High strength, precision-made hollow rivets assembled on a solid mandrel. They are specially useful for “blind” fastening where no access to the reverse side is available. Rivets are made in various sizes with head styles in aluminium, steel, monel, copper and stainless steel. Two types of standard rivets, open and closed, are available but the most common open type is described below. Standard Open Type: Standard open type rivet is a hollow rivet, pre-assembled on to a headed pin or mandrel. The mandrel is designed to fracture at a pre-determined point during the setting operation, when the lamination forming the structure being fastened, have been drawn closely together and the whole join is tight. Normally on the vessel the rivet of aluminium alloy body and steel mandrel are used. Unless otherwise specified the aluminium alloy body and steel mandrel type will be supplied. Please specify diameter and length in mm when ordering.