Bump Test and Calibration Station

330604 BUMPTEST & CALIBRATION STATION, GALAXY GX2 NO-CHARGE #10128651

IMPA:330604

MTML UOM:SET

An automated test system provides simple and intelligent testing and calibration of multigas detectors, driven by the most advanced technology available in any portable gas detector. The gas provided by the Bump Test Station flows through the dust and water filter to the sensor(s) confirming correct functionality of the gas detector ensuring compliance with country-specific requirements and regulations, standards, recommendations, etc. Once any gas detector is placed in this system, it can be tested, calibrated automatically.

330605 BUMPTEST & CALIBRATION STATION, GALAXY GX2 NO-CHARGE #10128637

IMPA:330605

MTML UOM:SET

An automated test system provides simple and intelligent testing and calibration of multigas detectors, driven by the most advanced technology available in any portable gas detector. The gas provided by the Bump Test Station flows through the dust and water filter to the sensor(s) confirming correct functionality of the gas detector ensuring compliance with country-specific requirements and regulations, standards, recommendations, etc. Once any gas detector is placed in this system, it can be tested, calibrated automatically.

330606 BUMPTEST & CALIBRATION STATION, GALAXY GX2 CHARGING #10128653

IMPA:330606

MTML UOM:SET

An automated test system provides simple and intelligent testing and calibration of multigas detectors, driven by the most advanced technology available in any portable gas detector. The gas provided by the Bump Test Station flows through the dust and water filter to the sensor(s) confirming correct functionality of the gas detector ensuring compliance with country-specific requirements and regulations, standards, recommendations, etc. Once any gas detector is placed in this system, it can be tested, calibrated automatically.

330615 BUMPTEST & CALIBRATION STATION, GALAXY GX2 CHARGING #10128639

IMPA:330615

MTML UOM:SET

An automated test system provides simple and intelligent testing and calibration of multigas detectors, driven by the most advanced technology available in any portable gas detector. The gas provided by the Bump Test Station flows through the dust and water filter to the sensor(s) confirming correct functionality of the gas detector ensuring compliance with country-specific requirements and regulations, standards, recommendations, etc. Once any gas detector is placed in this system, it can be tested, calibrated automatically.

330636 BUMPTEST & CALIBRATION STATION, GALAXY GX2 CHARGING #10128635

IMPA:330636

MTML UOM:SET

An automated test system provides simple and intelligent testing and calibration of multigas detectors, driven by the most advanced technology available in any portable gas detector. The gas provided by the Bump Test Station flows through the dust and water filter to the sensor(s) confirming correct functionality of the gas detector ensuring compliance with country-specific requirements and regulations, standards, recommendations, etc. Once any gas detector is placed in this system, it can be tested, calibrated automatically.

330639 GAS CALIBRATION MODEL RP 58LTR, MSA USA #10045035 EU #10053022

IMPA:330639

MTML UOM:PCE

Type Model RP with RFID Tag, 58 Liter - 500 psig/34,5 Bar, Approval: EN12205, U.S. DOT-39 and Canadian TC-39M, Content: 1,45 Vol% Methane, 15,0 Vol% Oxygen, 60 ppm Carbon Monoxide, 20 ppm Hydrogen Sulfide, Balance: Nitrogen

330660 BUMPTEST STATION DRAEGER, W/OUT GAS CYLINDER #8319131

IMPA:330660

MTML UOM:SET

An automated test system provides simple and intelligent testing and calibration of multigas detectors, driven by the most advanced technology available in any portable gas detector. The gas provided by the Bump Test Station flows through the dust and water filter to the sensor(s) confirming correct functionality of the gas detector ensuring compliance with country-specific requirements and regulations, standards, recommendations, etc. Once any gas detector is placed in this system, it can be tested, calibrated automatically.

330667 BUMPTEST STATION DRAEGER, INCL. TEST GAS CYL. #8319130

IMPA:330667

MTML UOM:SET

An automated test system provides simple and intelligent testing and calibration of multigas detectors, driven by the most advanced technology available in any portable gas detector. The gas provided by the Bump Test Station flows through the dust and water filter to the sensor(s) confirming correct functionality of the gas detector ensuring compliance with country-specific requirements and regulations, standards, recommendations, etc. Once any gas detector is placed in this system, it can be tested, calibrated automatically.

330668 CALIBRATION & BUMP TEST X-DOCK, 5300 X-AM 125 #8321880

IMPA:330668

MTML UOM:SET

The X-dock 5300 includes a master station including a module for a gas detection instrument from the X-am 1/2/5x00 or Pac family. It is immediately ready to use. The X-dock 6300 and 6600 versions can be configured freely. They consist of a master station and can be expanded with up to 10 modules for X-am 1/2/5x00 and/or Pac gas detection instruments. Insert the device, close the lid and remove it when the indicator goes “green“ – a test with the X-dock is just that simple. It immediately detects all sensor combinations. Furthermore, the X-dock automatically tests and adjusts when all required test gases are connected. The X-dock stores all of the relevant data and reads the collected information from the gas detection instruments for subsequent evaluations. All Draeger test gas cylinders are already stored in the database – entering the part number will automatically fill in the fields required for the gas configuration.

330669 CALIBRATION & BUMP TEST X-DOCK, 5300 PAC #8321881

IMPA:330669

MTML UOM:SET

The X-dock 5300 includes a master station including a module for a gas detection instrument from the X-am 1/2/5x00 or Pac family. It is immediately ready to use. The X-dock 6300 and 6600 versions can be configured freely. They consist of a master station and can be expanded with up to 10 modules for X-am 1/2/5x00 and/or Pac gas detection instruments. Insert the device, close the lid and remove it when the indicator goes “green“ – a test with the X-dock is just that simple. It immediately detects all sensor combinations. Furthermore, the X-dock automatically tests and adjusts when all required test gases are connected. The X-dock stores all of the relevant data and reads the collected information from the gas detection instruments for subsequent evaluations. All Draeger test gas cylinders are already stored in the database – entering the part number will automatically fill in the fields required for the gas configuration.

330670 CALIBRATION & BUMP TEST X-DOCK, 6300 MASTER #8321900

IMPA:330670

MTML UOM:SET

The X-dock 5300 includes a master station including a module for a gas detection instrument from the X-am 1/2/5x00 or Pac family. It is immediately ready to use. The X-dock 6300 and 6600 versions can be configured freely. They consist of a master station and can be expanded with up to 10 modules for X-am 1/2/5x00 and/or Pac gas detection instruments. Insert the device, close the lid and remove it when the indicator goes “green“ – a test with the X-dock is just that simple. It immediately detects all sensor combinations. Furthermore, the X-dock automatically tests and adjusts when all required test gases are connected. The X-dock stores all of the relevant data and reads the collected information from the gas detection instruments for subsequent evaluations. All Draeger test gas cylinders are already stored in the database – entering the part number will automatically fill in the fields required for the gas configuration.

330671 CALIBRATION & BUMP TEST X-DOCK, 6600 MASTER #8321901

IMPA:330671

MTML UOM:SET

The X-dock 5300 includes a master station including a module for a gas detection instrument from the X-am 1/2/5x00 or Pac family. It is immediately ready to use. The X-dock 6300 and 6600 versions can be configured freely. They consist of a master station and can be expanded with up to 10 modules for X-am 1/2/5x00 and/or Pac gas detection instruments. Insert the device, close the lid and remove it when the indicator goes “green“ – a test with the X-dock is just that simple. It immediately detects all sensor combinations. Furthermore, the X-dock automatically tests and adjusts when all required test gases are connected. The X-dock stores all of the relevant data and reads the collected information from the gas detection instruments for subsequent evaluations. All Draeger test gas cylinders are already stored in the database – entering the part number will automatically fill in the fields required for the gas configuration.

330672 CALIBRATION & BUMP TEST X-DOCK, MODULE X-AM 125 #8321890

IMPA:330672

MTML UOM:SET

The X-dock 5300 includes a master station including a module for a gas detection instrument from the X-am 1/2/5x00 or Pac family. It is immediately ready to use. The X-dock 6300 and 6600 versions can be configured freely. They consist of a master station and can be expanded with up to 10 modules for X-am 1/2/5x00 and/or Pac gas detection instruments. Insert the device, close the lid and remove it when the indicator goes “green“ – a test with the X-dock is just that simple. It immediately detects all sensor combinations. Furthermore, the X-dock automatically tests and adjusts when all required test gases are connected. The X-dock stores all of the relevant data and reads the collected information from the gas detection instruments for subsequent evaluations. All Draeger test gas cylinders are already stored in the database – entering the part number will automatically fill in the fields required for the gas configuration.

330673 CALIBRATION & BUMP TEST X-DOCK, MODULE X-AM 125+ #8321891

IMPA:330673

MTML UOM:SET

The X-dock 5300 includes a master station including a module for a gas detection instrument from the X-am 1/2/5x00 or Pac family. It is immediately ready to use. The X-dock 6300 and 6600 versions can be configured freely. They consist of a master station and can be expanded with up to 10 modules for X-am 1/2/5x00 and/or Pac gas detection instruments. Insert the device, close the lid and remove it when the indicator goes “green“ – a test with the X-dock is just that simple. It immediately detects all sensor combinations. Furthermore, the X-dock automatically tests and adjusts when all required test gases are connected. The X-dock stores all of the relevant data and reads the collected information from the gas detection instruments for subsequent evaluations. All Draeger test gas cylinders are already stored in the database – entering the part number will automatically fill in the fields required for the gas configuration.